JOHN GUEST Manual Two-Way Ball Valve: 3/8 in, Polypropylene, Straight, Push x Push
The JOHN GUEST Manual Two-Way Ball Valve is a 3/8 in, NSF 51 Compliant polypropylene ball valve, supplied as a straight, push x push configuration in a 10-pack (MPN PPSV041212E). This product is designed for…
SKU 3G-OTH-436267
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JOHN GUEST Manual Two-Way Ball Valve is a 3/8 in, NSF 51 Compliant polypropylene ball valve, supplied as a straight, push x push configuration in a 10-pack (MPN PPSV041212E). This product is designed for straightforward manual flow control in industrial fluid-handling applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the JOHN GUEST PPSV041212E ball valve used for?
The JOHN GUEST PPSV041212E manual two-way ball valve is used for on/off flow control in low-pressure fluid systems. Its polypropylene construction and push-fit connections make it suitable for potable water, food processing, and chemical handling applications where NSF 51 compliance is required.
What are the specifications of the JOHN GUEST PPSV041212E ball valve?
This JOHN GUEST ball valve has a 3/8 inch push x push connection, straight body design, and polypropylene construction. It is sold in a 10-pack (MPN PPSV041212E) and is NSF 51 compliant for use with potable water. The valve is manual two-way type, suitable for low-pressure applications.
Where to buy JOHN GUEST PPSV041212E ball valves worldwide?
3G Electric supplies the JOHN GUEST PPSV041212E ball valve worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this genuine JOHN GUEST part to any country.
How to install a JOHN GUEST push-fit ball valve?
To install a JOHN GUEST push-fit ball valve, ensure the pipe end is clean and square-cut. Push the pipe firmly into the collet until it stops. To release, press the collet evenly while pulling the pipe. Always follow local plumbing codes and test the system for leaks after installation.
Digunakan dalam
Aplikasi umum untuk JOHN GUESTJOHN GUEST Produk
3G Electric memasok JOHN GUEST nsf 51 compliant polypropylene ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
