Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Corrosion-Resistant Quick-Release Threaded Pivot & - Corrosion-Resistant Quick-Release Threaded Pivot & Rotate Hoist Rings
JW WINCOCorrosion-Resistant Quick-Release Threaded Pivot & Rotate Hoist Rings

JW WINCO Corrosion-Resistant Quick-Release Threaded Pivot &

JW WINCO Quick-Release Hoist Ring berbahan Stainless Steel adalah komponen pengangkat (lifting) yang dirancang untuk aplikasi industri yang memerlukan ketahanan korosi tinggi. Produk tipe Pivot/Swivel ini memiliki…

SKU 3G-OTH-341694

Juga terdaftar sebagai: 1135M1217NI · 1135 M12 17 NI

Merek
JW WINCO
Item
Corrosion-Resistant Quick-Release Threaded Pivot &
Kategori
Corrosion-Resistant Quick-Release Threaded Pivot & Rotate Hoist Rings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
1135-M12-17-NI
Type
M12 Thread Size, Pivot/Swivel
Material
Stainless Steel
Operation
Lifting
Load Limit
6.2 kN
Thread Size
M12
Working Pin Length
17 mm
Working Load Limit - Side Load
2.3 kN (517 lbf)

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Quick-Release Hoist Ring berbahan Stainless Steel adalah komponen pengangkat (lifting) yang dirancang untuk aplikasi industri yang memerlukan ketahanan korosi tinggi. Produk tipe Pivot/Swivel ini memiliki Thread Size M12, Load Limit 6,2 kN, Working Pin Length 17 mm, dan Side Load 2,3 kN (517 lbf). Sangat cocok digunakan sebagai perlengkapan angkat pada peralatan industri di lingkungan agresif.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Quick-Release Hoist Ring Stainless Steel?

JW WINCO Quick-Release Hoist Ring Stainless Steel memiliki Thread Size M12, Load Limit 6,2 kN, Working Pin Length 17 mm, dan Side Load 2,3 kN (517 lbf). Produk ini tipe Pivot/Swivel dan terbuat dari Stainless Steel untuk ketahanan korosi.

Untuk apa JW WINCO Quick-Release Hoist Ring digunakan?

Produk ini digunakan sebagai titik angkat (lifting point) pada peralatan industri, terutama di lingkungan yang memerlukan ketahanan terhadap korosi. Dengan desain Quick-Release, memudahkan pemasangan dan pelepasan beban secara cepat dan aman.

Bagaimana cara memilih JW WINCO Hoist Ring yang tepat?

Pilih berdasarkan Thread Size (M12), Load Limit (6,2 kN), dan Working Pin Length (17 mm) yang sesuai dengan aplikasi Anda. Pastikan juga material Stainless Steel cocok untuk lingkungan kerja yang korosif. Side Load maksimal 2,3 kN (517 lbf) harus diperhatikan.

Di mana beli JW WINCO Quick-Release Hoist Ring di Indonesia?

Anda dapat membeli JW WINCO Quick-Release Hoist Ring Stainless Steel melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant quick-release threaded pivot & rotate hoist rings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments
JW WINCO
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
This clevis fork head is made of corrosion-resistant stainless steel for mechanical linkage applications. It features a plain design with M4 tap size, right-hand thread, and 8 mm body width. Suitable for connecting rods or cables to pivoting components in industrial machinery and automation
JW WINCO
This clevis fork head is made of corrosion-resistant stainless steel for mechanical linkage applications. It features a plain design with M4 tap size, right-hand thread, and 8 mm body width. Suitable for connecting rods or cables to pivoting components in industrial machinery and automation
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators
JW WINCO
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required
JW WINCO Quick-Release Hoist Ring: Stainless Steel, 4,047 lbf Load Limit, 1"-8 Thread Size (MPN 1135-1X8-1.063-NI)
JW WINCO
JW WINCO Quick-Release Hoist Ring: Stainless Steel, 4,047 lbf Load Limit, 1"-8 Thread Size (MPN 1135-1X8-1.063-NI)
Stainless steel quick-release hoist ring with M16 thread, 17 mm working pin length, and 8.4 kN load limit. Pivot/swivel design allows multi-directional lifting. Side load capacity 4.2 kN (944 lbf). Suitable for lifting operations in corrosive environments
JW WINCO
Stainless steel quick-release hoist ring with M16 thread, 17 mm working pin length, and 8.4 kN load limit. Pivot/swivel design allows multi-directional lifting. Side load capacity 4.2 kN (944 lbf). Suitable for lifting operations in corrosive environments
This corrosion-resistant quick-release threaded pivot and rotate hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, a load limit of 16.6 kN, and a side load working limit of 5 kN (1124 lbf). Suitable for lifting and positioning loads in industrial applications where multi-directional handling is required
JW WINCO
This corrosion-resistant quick-release threaded pivot and rotate hoist ring is made of stainless steel. It has an M20 thread size, a working pin length of 22 mm, a load limit of 16.6 kN, and a side load working limit of 5 kN (1124 lbf). Suitable for lifting and positioning loads in industrial applications where multi-directional handling is required
This stainless steel hoist ring is designed for lifting operations requiring corrosion resistance. It features a 3/4"-10 thread size, a working pin length of 22 mm, and a working load limit of 3,619 lbf (side load 5 kN / 1,124 lbf). Suitable for industrial environments where exposure to moisture or chemicals is a concern
JW WINCO
This stainless steel hoist ring is designed for lifting operations requiring corrosion resistance. It features a 3/4"-10 thread size, a working pin length of 22 mm, and a working load limit of 3,619 lbf (side load 5 kN / 1,124 lbf). Suitable for industrial environments where exposure to moisture or chemicals is a concern
This corrosion-resistant quick-release hoist ring is made of stainless steel with an M10 thread and 14 mm working pin length. It supports a working load limit of 3.9 kN and a side load limit of 1.5 kN (337 lbf). The pivot/swivel design allows for safe lifting and positioning in environments requiring corrosion resistance
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel with an M10 thread and 14 mm working pin length. It supports a working load limit of 3.9 kN and a side load limit of 1.5 kN (337 lbf). The pivot/swivel design allows for safe lifting and positioning in environments requiring corrosion resistance
This stainless steel hoist ring provides a corrosion-resistant lifting point for applications where rust resistance is required. It features a 1/2"-13 thread size, a working pin length of 17 mm, and a side load limit of 2.7 kN (607 lbf). Suitable for lifting operations in environments such as marine, chemical, or food processing
JW WINCO
This stainless steel hoist ring provides a corrosion-resistant lifting point for applications where rust resistance is required. It features a 1/2"-13 thread size, a working pin length of 17 mm, and a side load limit of 2.7 kN (607 lbf). Suitable for lifting operations in environments such as marine, chemical, or food processing