Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Narrow-Shaft Hygienic Hex Head Screw with Sealing Washer - Narrow-Shaft Hygienic Hex Head Screws with Sealing Washer
JW WINCONarrow-Shaft Hygienic Hex Head Screws with Sealing Washer

JW WINCO Narrow-Shaft Hygienic Hex Head Screw with Sealing Washer

JW WINCO menghadirkan Narrow-Shaft Hygienic Hex Head Screws dengan Sealing Washer, baut kepala segi enam berporos sempit yang dirancang khusus untuk aplikasi higienis di industri pengolahan makanan dan minuman…

SKU 3G-OTH-538294

Juga terdaftar sebagai: 1582M1050MTE1 · 1582 M10 50 MT E 1

Merek
JW WINCO
Item
Narrow-Shaft Hygienic Hex Head Screw with Sealing Washer
Kategori
Narrow-Shaft Hygienic Hex Head Screws with Sealing Washer
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
1582-M10-50-MT-E-1
Type
Partially Threaded, M10, Grade 316L
Thread Lg
12 mm Min
Washer Type
FDA-Approved Pre-Mounted Sealing

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO menghadirkan Narrow-Shaft Hygienic Hex Head Screws dengan Sealing Washer, baut kepala segi enam berporos sempit yang dirancang khusus untuk aplikasi higienis di industri pengolahan makanan dan minuman. Produk ini memiliki spesifikasi M10, Grade 316L, dengan panjang ulir minimal 12 mm, dan dilengkapi washer penyegel pra-pasang yang disetujui FDA. Sebagai bagian dari peralatan industri, baut ini memastikan kebersihan dan keamanan sambungan di lingkungan yang memerlukan standar sanitasi tinggi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Narrow-Shaft Hygienic Hex Head Screws dengan Sealing Washer?

Produk ini memiliki tipe partially threaded dengan ukuran M10, Grade 316L, panjang ulir minimal 12 mm, dan dilengkapi washer penyegel pra-pasang yang disetujui FDA. Nomor komponennya adalah 1582-M10-50-MT-E-1.

Untuk apa JW WINCO Hygienic Hex Head Screws digunakan?

Baut ini digunakan untuk aplikasi higienis di industri pengolahan makanan dan minuman, di mana kebersihan dan ketahanan korosi sangat penting. Desain poros sempit dan washer penyegel FDA memastikan sambungan yang aman dan mudah dibersihkan.

Di mana beli JW WINCO Narrow-Shaft Hygienic Hex Head Screws di Indonesia?

Anda dapat membeli produk ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Apa bahan dari JW WINCO Hygienic Hex Head Screws?

Baut ini terbuat dari stainless steel Grade 316L, yang dikenal tahan terhadap korosi dan cocok untuk lingkungan higienis. Washer penyegelnya terbuat dari bahan yang disetujui FDA.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO narrow-shaft hygienic hex head screws with sealing washer. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
Partially threaded M5 hex head screw in Grade 316L stainless steel with a 6 mm minimum thread length. Includes an FDA-approved pre-mounted sealing washer for hygienic sealing in applications requiring clean, leak-resistant fastening
JW WINCO
Partially threaded M5 hex head screw in Grade 316L stainless steel with a 6 mm minimum thread length. Includes an FDA-approved pre-mounted sealing washer for hygienic sealing in applications requiring clean, leak-resistant fastening
Partially threaded M10 hex head screw in Grade 316L stainless steel with a narrow shaft and a minimum thread length of 12 mm. Includes an FDA-approved pre-mounted sealing washer. Used in sanitary processing equipment where resistance to washdown and bacterial ingress is required
JW WINCO
Partially threaded M10 hex head screw in Grade 316L stainless steel with a narrow shaft and a minimum thread length of 12 mm. Includes an FDA-approved pre-mounted sealing washer. Used in sanitary processing equipment where resistance to washdown and bacterial ingress is required
Partially threaded M6 Grade 316L stainless steel hex head screw with a minimum 8 mm thread length and an FDA-approved pre-mounted sealing washer. Designed for use in environments requiring corrosion resistance and a reliable seal, such as food processing, pharmaceutical, and clean-room applications
JW WINCO
Partially threaded M6 Grade 316L stainless steel hex head screw with a minimum 8 mm thread length and an FDA-approved pre-mounted sealing washer. Designed for use in environments requiring corrosion resistance and a reliable seal, such as food processing, pharmaceutical, and clean-room applications
Partially threaded M5 hex head screw in Grade 316L stainless steel with a narrow shaft and FDA-approved pre-mounted sealing washer. Minimum thread length of 7 mm. Used in sanitary equipment requiring washdown resistance and prevention of bacterial ingress
JW WINCO
Partially threaded M5 hex head screw in Grade 316L stainless steel with a narrow shaft and FDA-approved pre-mounted sealing washer. Minimum thread length of 7 mm. Used in sanitary equipment requiring washdown resistance and prevention of bacterial ingress
Partially threaded M8 hex head screw in Grade 316L stainless steel with a 10 mm minimum thread length. Includes an FDA-approved pre-mounted sealing washer. Suitable for use in sanitary processing equipment where washdown resistance and prevention of bacterial ingress are required
JW WINCO
Partially threaded M8 hex head screw in Grade 316L stainless steel with a 10 mm minimum thread length. Includes an FDA-approved pre-mounted sealing washer. Suitable for use in sanitary processing equipment where washdown resistance and prevention of bacterial ingress are required
Partially threaded M6 hex head screw in Grade 316L stainless steel with a narrow shaft design. Includes an FDA-approved pre-mounted sealing washer. Minimum 8 mm thread length. Suitable for applications requiring hygiene and corrosion resistance
JW WINCO
Partially threaded M6 hex head screw in Grade 316L stainless steel with a narrow shaft design. Includes an FDA-approved pre-mounted sealing washer. Minimum 8 mm thread length. Suitable for applications requiring hygiene and corrosion resistance
Partially threaded M5 hex head screw made from Grade 316L stainless steel, featuring a narrow shaft and an FDA-approved pre-mounted sealing washer. Minimum thread length is 7 mm. Suitable for use in sanitary environments requiring resistance to washdown and bacterial ingress
JW WINCO
Partially threaded M5 hex head screw made from Grade 316L stainless steel, featuring a narrow shaft and an FDA-approved pre-mounted sealing washer. Minimum thread length is 7 mm. Suitable for use in sanitary environments requiring resistance to washdown and bacterial ingress
Partially threaded M5 hex head screw in Grade 316L stainless steel with a narrow shaft and FDA-approved pre-mounted sealing washer. The 6 mm minimum thread length and sealing washer design help prevent bacterial ingress in applications requiring frequent washdown and hygiene
JW WINCO
Partially threaded M5 hex head screw in Grade 316L stainless steel with a narrow shaft and FDA-approved pre-mounted sealing washer. The 6 mm minimum thread length and sealing washer design help prevent bacterial ingress in applications requiring frequent washdown and hygiene