Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO 7-Arm Knob with Threaded Hole - 7-Arm Knobs with Threaded Hole
JW WINCO7-Arm Knobs with Threaded Hole

JW WINCO 7-Arm Knob with Threaded Hole

Knob tangan besi cor 7 titik dari JW WINCO, model 16NC81/E, adalah komponen kontrol manual yang kokoh untuk peralatan industri. Dengan diameter 80 mm dan ulir M16 sepanjang 28 mm, knop ini dirancang untuk memberikan…

SKU 3G-OTH-524844

Juga terdaftar sebagai: 16NC81E · 16NC81 E · 16NC81-E

Merek
JW WINCO
Item
7-Arm Knob with Threaded Hole
Part Number
16NC81/E
Kategori
7-Arm Knobs with Threaded Hole
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
16NC81/E
Type
Cast Iron, M16 Thread
Dia
80 mm
Thread Lg
28 mm

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Knob tangan besi cor 7 titik dari JW WINCO, model 16NC81/E, adalah komponen kontrol manual yang kokoh untuk peralatan industri. Dengan diameter 80 mm dan ulir M16 sepanjang 28 mm, knop ini dirancang untuk memberikan pegangan yang kuat dan presisi pada berbagai aplikasi mesin. Produk ini merupakan pilihan tepat untuk kebutuhan pengaturan manual yang andal di lingkungan pabrik Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa knop tangan besi cor JW WINCO 7 titik digunakan?

Knop tangan ini digunakan sebagai pegangan manual pada peralatan industri, seperti katup, regulator, atau panel kontrol mesin. Desain 7 titik memberikan torsi yang lebih baik untuk pengaturan yang presisi.

Apa spesifikasi knop tangan JW WINCO 16NC81/E?

Spesifikasi knop ini meliputi diameter 80 mm, ulir M16 dengan panjang ulir 28 mm, dan terbuat dari besi cor. Produk ini memiliki 7 titik pegangan untuk kemudahan operasi manual.

Di mana beli knop tangan JW WINCO 7 titik di Indonesia?

Anda dapat membeli knop tangan JW WINCO 7 titik ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih knop tangan yang tepat untuk aplikasi saya?

Pilih knop tangan berdasarkan diameter, jenis ulir, dan panjang ulir yang sesuai dengan peralatan Anda. Untuk aplikasi yang membutuhkan pegangan kuat dan tahan lama, knop besi cor JW WINCO dengan ulir M16 dan diameter 80 mm adalah pilihan yang tepat.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.
Not sure this is the right part? Photo-identify it→

JW WINCO Produk

3G Electric memasok JW WINCO 7-arm knobs with threaded hole. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This 7-arm knob features a plastic body with a steel threaded insert for manual adjustment and clamping. The 3/8"-16 thread size allows engagement with corresponding studs or bolts. Suitable for use in machinery, jigs, and fixtures where repeated hand tightening is required
JW WINCO
This 7-arm knob features a plastic body with a steel threaded insert for manual adjustment and clamping. The 3/8"-16 thread size allows engagement with corresponding studs or bolts. Suitable for use in machinery, jigs, and fixtures where repeated hand tightening is required
This 7-arm knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The 7-point star design provides multiple grip points for manual adjustment and clamping without tools. Suitable for use on machinery, fixtures, and workholding equipment
JW WINCO
This 7-arm knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The 7-point star design provides multiple grip points for manual adjustment and clamping without tools. Suitable for use on machinery, fixtures, and workholding equipment
Plastic 7-arm knob with a steel thread insert. Thread size 5/8"-11. Used for manual adjustment and clamping on machinery, jigs, and fixtures
JW WINCO
Plastic 7-arm knob with a steel thread insert. Thread size 5/8"-11. Used for manual adjustment and clamping on machinery, jigs, and fixtures
This 7-arm knob features a plastic body with a stainless steel M16 threaded insert and a 30 mm thread length. The seven-point star design provides a secure grip for manual adjustment and clamping tasks on machinery, jigs, and fixtures
JW WINCO
This 7-arm knob features a plastic body with a stainless steel M16 threaded insert and a 30 mm thread length. The seven-point star design provides a secure grip for manual adjustment and clamping tasks on machinery, jigs, and fixtures
This 7-arm star knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The seven-point design provides a secure, non-slip grip for manual adjustment and clamping on machinery, jigs, and fixtures. The corrosion-resistant construction suits industrial environments where frequent hand tightening is required
JW WINCO
This 7-arm star knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The seven-point design provides a secure, non-slip grip for manual adjustment and clamping on machinery, jigs, and fixtures. The corrosion-resistant construction suits industrial environments where frequent hand tightening is required
7-arm knob with threaded hole, 50 mm diameter, plastic body with steel M8 thread. Used for manual adjustment, clamping, and positioning on industrial machinery and equipment
JW WINCO
7-arm knob with threaded hole, 50 mm diameter, plastic body with steel M8 thread. Used for manual adjustment, clamping, and positioning on industrial machinery and equipment
This 7-arm star knob features a plastic body with a stainless steel threaded insert. The M10 thread has an 18 mm length. The 7-point design provides multiple grip points for manual adjustment and clamping on machinery, jigs, and fixtures without tools
JW WINCO
This 7-arm star knob features a plastic body with a stainless steel threaded insert. The M10 thread has an 18 mm length. The 7-point design provides multiple grip points for manual adjustment and clamping on machinery, jigs, and fixtures without tools
Plastic 7-arm knob with stainless steel M6 threaded insert, 12 mm thread length. Designed for manual adjustment and retention on machinery guards, clamps, and positioning fixtures where a captive fastener prevents misplacement
JW WINCO
Plastic 7-arm knob with stainless steel M6 threaded insert, 12 mm thread length. Designed for manual adjustment and retention on machinery guards, clamps, and positioning fixtures where a captive fastener prevents misplacement