Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO 7-Arm Knob with Threaded Hole, M16, 30 mm Thread Length, 16NC88/KMS - 7-Arm Knobs with Threaded Hole
JW WINCO7-Arm Knobs with Threaded Hole

JW WINCO 7-Arm Knob with Threaded Hole, M16, 30 mm Thread Length, 16NC88/KMS

JW WINCO Hand Knobs adalah knop tangan 7-arm dengan ulir M16 yang dirancang untuk aplikasi pengencangan manual pada peralatan industri. Knop ini memiliki ulir kuningan (brass thread) dengan panjang ulir 30 mm dan…

SKU 3G-OTH-524832

Juga terdaftar sebagai: 16NC88KMS · 16NC88 KMS · 16NC88-KMS

Merek
JW WINCO
Item
7-Arm Knob with Threaded Hole, M16, 30 mm Thread Length, 16NC88/KMS
Part Number
16NC88/KMS
Kategori
7-Arm Knobs with Threaded Hole
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
16NC88/KMS
Type
Plastic w/ Brass Thread, M16 Thread
Thread Lg
30 mm
Star Knobs
7 Point

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Hand Knobs adalah knop tangan 7-arm dengan ulir M16 yang dirancang untuk aplikasi pengencangan manual pada peralatan industri. Knop ini memiliki ulir kuningan (brass thread) dengan panjang ulir 30 mm dan bentuk bintang 7 titik (7 point star knobs). Produk dengan nomor bagian 16NC88/KMS ini cocok digunakan sebagai komponen pengganti atau pelengkap pada mesin-mesin produksi di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Hand Knobs 16NC88/KMS?

JW WINCO Hand Knobs 16NC88/KMS memiliki tipe plastik dengan ulir kuningan (brass thread) M16, panjang ulir 30 mm, dan desain knop bintang 7 titik (7 point star knobs). Produk ini ideal untuk aplikasi pengencangan manual pada peralatan industri.

Untuk apa JW WINCO Hand Knobs digunakan?

JW WINCO Hand Knobs digunakan sebagai knop tangan untuk pengencangan atau pelonggaran komponen secara manual pada mesin dan peralatan industri. Desain 7-arm memberikan pegangan yang ergonomis dan torsi yang memadai untuk berbagai aplikasi mekanis.

Di mana beli JW WINCO Hand Knobs di Indonesia?

Anda dapat membeli JW WINCO Hand Knobs 16NC88/KMS melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Bagaimana cara memilih JW WINCO Hand Knobs yang tepat?

Pilih JW WINCO Hand Knobs berdasarkan ukuran ulir yang dibutuhkan. Produk ini memiliki ulir M16 dengan panjang ulir 30 mm. Pastikan knop bintang 7 titik sesuai dengan kebutuhan pegangan dan torsi pada aplikasi Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.
Not sure this is the right part? Photo-identify it→

JW WINCO Produk

3G Electric memasok JW WINCO 7-arm knobs with threaded hole. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This 7-arm knob features a plastic body with a steel threaded insert for manual adjustment and clamping. The 3/8"-16 thread size allows engagement with corresponding studs or bolts. Suitable for use in machinery, jigs, and fixtures where repeated hand tightening is required
JW WINCO
This 7-arm knob features a plastic body with a steel threaded insert for manual adjustment and clamping. The 3/8"-16 thread size allows engagement with corresponding studs or bolts. Suitable for use in machinery, jigs, and fixtures where repeated hand tightening is required
This 7-arm knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The 7-point star design provides multiple grip points for manual adjustment and clamping without tools. Suitable for use on machinery, fixtures, and workholding equipment
JW WINCO
This 7-arm knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The 7-point star design provides multiple grip points for manual adjustment and clamping without tools. Suitable for use on machinery, fixtures, and workholding equipment
Plastic 7-arm knob with a steel thread insert. Thread size 5/8"-11. Used for manual adjustment and clamping on machinery, jigs, and fixtures
JW WINCO
Plastic 7-arm knob with a steel thread insert. Thread size 5/8"-11. Used for manual adjustment and clamping on machinery, jigs, and fixtures
This 7-arm knob features a plastic body with a stainless steel M16 threaded insert and a 30 mm thread length. The seven-point star design provides a secure grip for manual adjustment and clamping tasks on machinery, jigs, and fixtures
JW WINCO
This 7-arm knob features a plastic body with a stainless steel M16 threaded insert and a 30 mm thread length. The seven-point star design provides a secure grip for manual adjustment and clamping tasks on machinery, jigs, and fixtures
This 7-arm star knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The seven-point design provides a secure, non-slip grip for manual adjustment and clamping on machinery, jigs, and fixtures. The corrosion-resistant construction suits industrial environments where frequent hand tightening is required
JW WINCO
This 7-arm star knob features a plastic body with a stainless steel M12 threaded insert and a 22 mm thread length. The seven-point design provides a secure, non-slip grip for manual adjustment and clamping on machinery, jigs, and fixtures. The corrosion-resistant construction suits industrial environments where frequent hand tightening is required
7-arm knob with threaded hole, 50 mm diameter, plastic body with steel M8 thread. Used for manual adjustment, clamping, and positioning on industrial machinery and equipment
JW WINCO
7-arm knob with threaded hole, 50 mm diameter, plastic body with steel M8 thread. Used for manual adjustment, clamping, and positioning on industrial machinery and equipment
This 7-arm star knob features a plastic body with a stainless steel threaded insert. The M10 thread has an 18 mm length. The 7-point design provides multiple grip points for manual adjustment and clamping on machinery, jigs, and fixtures without tools
JW WINCO
This 7-arm star knob features a plastic body with a stainless steel threaded insert. The M10 thread has an 18 mm length. The 7-point design provides multiple grip points for manual adjustment and clamping on machinery, jigs, and fixtures without tools
Plastic 7-arm knob with stainless steel M6 threaded insert, 12 mm thread length. Designed for manual adjustment and retention on machinery guards, clamps, and positioning fixtures where a captive fastener prevents misplacement
JW WINCO
Plastic 7-arm knob with stainless steel M6 threaded insert, 12 mm thread length. Designed for manual adjustment and retention on machinery guards, clamps, and positioning fixtures where a captive fastener prevents misplacement