Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Hex-Head Stop Bolt with Retaining Magnet & Lock Nut, M6-30 - Hex-Head Stop Bolts with Retaining Magnet & Lock Nut
JW WINCOHex-Head Stop Bolts with Retaining Magnet & Lock Nut

JW WINCO Hex-Head Stop Bolt with Retaining Magnet & Lock Nut, M6-30

Baut penghenti kerja (workholding stop bolt) JW WINCO dengan ukuran ulir M6 ini dirancang untuk aplikasi fixturing dan workholding pada peralatan industri. Dilengkapi dengan magnet penahan dan mur pengunci, baut ini…

SKU 3G-OTH-528547

Juga terdaftar sebagai: 2516M630ND · 251 6 M6 30 ND · 251-6-M6-30-ND

Merek
JW WINCO
Item
Hex-Head Stop Bolt with Retaining Magnet & Lock Nut, M6-30
Kategori
Hex-Head Stop Bolts with Retaining Magnet & Lock Nut
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
251.6-M6-30-ND
Type
Zinc Plated Steel Bolt – Zinc Plated Steel Nut, 25 N

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Baut penghenti kerja (workholding stop bolt) JW WINCO dengan ukuran ulir M6 ini dirancang untuk aplikasi fixturing dan workholding pada peralatan industri. Dilengkapi dengan magnet penahan dan mur pengunci, baut ini memiliki kekuatan penahan 25 N dan terbuat dari baja berlapis seng (zinc plated steel) untuk ketahanan korosi. Produk dengan nomor komponen 251.6-M6-30-ND ini merupakan solusi presisi untuk kebutuhan penjepitan komponen di lini produksi Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi baut JW WINCO M6 ini?

Baut JW WINCO ini memiliki ukuran ulir M6, tipe kepala segi enam (hex-head), dilengkapi magnet penahan dan mur pengunci. Materialnya adalah baja berlapis seng (zinc plated steel) dengan kekuatan penahan 25 N. Nomor komponennya adalah 251.6-M6-30-ND.

Untuk apa baut workholding JW WINCO ini digunakan?

Baut ini digunakan sebagai komponen workholding atau fixturing pada mesin perkakas dan peralatan industri untuk menahan atau mengunci benda kerja selama proses pemesinan. Magnet penahan membantu menjaga posisi baut tetap stabil.

Di mana beli JW WINCO Workholding Stop Bolt M6 di Indonesia?

Anda dapat membeli JW WINCO Workholding Stop Bolt M6 ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Apakah baut ini dilengkapi mur pengunci?

Ya, baut JW WINCO ini sudah dilengkapi dengan mur pengunci (lock nut) yang terbuat dari baja berlapis seng, sehingga memberikan keamanan tambahan saat digunakan pada aplikasi workholding.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO hex-head stop bolts with retaining magnet & lock nut. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
Hex-head stop bolt with retaining magnet and lock nut, M16 thread size. Bolt and nut are zinc plated steel. Used in workholding fixtures and jigs to locate and secure workpieces during machining operations
JW WINCO
Hex-head stop bolt with retaining magnet and lock nut, M16 thread size. Bolt and nut are zinc plated steel. Used in workholding fixtures and jigs to locate and secure workpieces during machining operations
Zinc plated steel hex-head stop bolt with retaining magnet and lock nut. Rated at 50 N with M8 thread size. Used in workholding fixtures and jigs for locating and securing workpieces in machining operations
JW WINCO
Zinc plated steel hex-head stop bolt with retaining magnet and lock nut. Rated at 50 N with M8 thread size. Used in workholding fixtures and jigs for locating and securing workpieces in machining operations
Hex-head stop bolt with retaining magnet and lock nut, M10 thread size. Bolt and nut are zinc plated steel. Used for positioning and retaining workpieces in industrial machining and assembly setups
JW WINCO
Hex-head stop bolt with retaining magnet and lock nut, M10 thread size. Bolt and nut are zinc plated steel. Used for positioning and retaining workpieces in industrial machining and assembly setups
This hex-head stop bolt features a retaining magnet and lock nut for secure positioning in workholding and fixturing applications. Constructed from zinc plated steel bolt and nut, it provides corrosion resistance and reliable clamping. Suitable for industrial setups requiring quick adjustment and retention of workpieces
JW WINCO
This hex-head stop bolt features a retaining magnet and lock nut for secure positioning in workholding and fixturing applications. Constructed from zinc plated steel bolt and nut, it provides corrosion resistance and reliable clamping. Suitable for industrial setups requiring quick adjustment and retention of workpieces
Zinc-plated steel hex-head stop bolt with retaining magnet and lock nut, M12 thread size. Used for precise positioning and clamping in machining and fixturing applications
JW WINCO
Zinc-plated steel hex-head stop bolt with retaining magnet and lock nut, M12 thread size. Used for precise positioning and clamping in machining and fixturing applications
Zinc plated steel hex-head stop bolt with retaining magnet and lock nut. M6 thread size, 25 N magnetic holding force. Used for precise workpiece positioning and repeatable stop points in machining fixtures
JW WINCO
Zinc plated steel hex-head stop bolt with retaining magnet and lock nut. M6 thread size, 25 N magnetic holding force. Used for precise workpiece positioning and repeatable stop points in machining fixtures
Zinc plated steel hex-head stop bolt with retaining magnet and lock nut. Rated at 50 N. Used in jigs and fixtures for precise workpiece location and holding during machining operations
JW WINCO
Zinc plated steel hex-head stop bolt with retaining magnet and lock nut. Rated at 50 N. Used in jigs and fixtures for precise workpiece location and holding during machining operations
This hex-head stop bolt features a retaining magnet and lock nut for quick positioning and secure clamping in workholding fixtures. The bolt and nut are zinc plated steel. Typical applications include machining and fixture setups where precise workpiece location and holding are required
JW WINCO
This hex-head stop bolt features a retaining magnet and lock nut for quick positioning and secure clamping in workholding fixtures. The bolt and nut are zinc plated steel. Typical applications include machining and fixture setups where precise workpiece location and holding are required