JW WINCO Bearing Locknut: Metric, Type 70852, 70852 M32X1.5 Industry Std Size
The JW WINCO Bearing Locknut: Metric is a Type 70852 bearing locknut with a thread size of M32x1.50 and a 48 mm nut outside diameter. This metric locknut is identified by the manufacturer part number 70852-ST-M32X1.5…
SKU 3G-OTH-153267
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Bearing Locknut: Metric is a Type 70852 bearing locknut with a thread size of M32x1.50 and a 48 mm nut outside diameter. This metric locknut is identified by the manufacturer part number 70852-ST-M32X1.5 and the industry standard size 70852 M32X1.5.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Frequently Asked Questions
What is a JW WINCO bearing locknut used for?
A JW WINCO bearing locknut secures bearings onto shafts in industrial machinery, preventing axial movement under load. It is commonly used in conveyors, pumps, gearboxes, and rotating equipment where precise bearing retention is critical for operational reliability.
What are the specifications of the JW WINCO 70852 bearing locknut?
The JW WINCO 70852 bearing locknut has a metric thread size of M32x1.50, a 48 mm nut outside diameter, and is classified as Type 70852. The manufacturer part number is 70852-ST-M32X1.5, and it conforms to the industry standard size 70852 M32X1.5.
Where to buy JW WINCO bearing locknuts worldwide?
3G Electric supplies JW WINCO bearing locknuts worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source the 70852-ST-M32X1.5 or other metric locknuts for your application.
How to install a JW WINCO bearing locknut?
To install a JW WINCO bearing locknut, clean the shaft threads and nut, then hand-thread the nut onto the shaft until snug. Use a spanner wrench on the locknut's notches to tighten to the torque specified by the equipment manufacturer. Always verify proper bearing seating before final tightening.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO bearing locknuts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
