JW WINCO Bearing Lock Washer: 70952-24-A-ST, Metric, Steel, 5 mm Washer Thick
The JW WINCO Bearing Lock Washer, model 70952-24-A-ST, is a steel bearing lock washer with a 5 mm washer thickness and a 32 mm face diameter. This metric component is designed for securing bearings in industrial…
SKU 3G-OTH-95143
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Bearing Lock Washer, model 70952-24-A-ST, is a steel bearing lock washer with a 5 mm washer thickness and a 32 mm face diameter. This metric component is designed for securing bearings in industrial equipment applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the JW WINCO Bearing Lock Washer 70952-24-A-ST used for?
The JW WINCO Bearing Lock Washer 70952-24-A-ST is used to secure bearings on shafts in industrial equipment, preventing loosening under vibration. It is commonly applied in conveyors, pumps, gearboxes, and heavy machinery where a reliable locking mechanism is required.
What are the specifications of the JW WINCO Bearing Lock Washer 70952-24-A-ST?
The JW WINCO Bearing Lock Washer 70952-24-A-ST is a metric, steel component with a 5 mm washer thickness and a 32 mm face diameter. It is designed for securing bearings in industrial applications and is manufactured by JW WINCO under part number 70952-24-A-ST.
Where to buy the JW WINCO Bearing Lock Washer 70952-24-A-ST worldwide?
You can source the JW WINCO Bearing Lock Washer 70952-24-A-ST through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the part reaches your facility efficiently.
How to install a JW WINCO bearing lock washer?
To install a JW WINCO bearing lock washer, slide it onto the shaft against the bearing inner ring, then tighten the nut. Bend one of the washer's tabs into a slot on the nut and another into a groove on the shaft to lock the assembly. Always follow the manufacturer's torque specifications.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO bearing lock washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
