JW WINCO Through-Hole Rubber Bumper: Cylindrical, Natural Rubber
The JW WINCO Through-Hole Rubber Bumper is a cylindrical plain bore vibration-isolating mount made of natural rubber with no thread. It is identified by MPN 351-20-25-8.5-B-55 and SKU 420CR2. 3G Electric interprets…
SKU 3G-OTH-598058
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Through-Hole Rubber Bumper is a cylindrical plain bore vibration-isolating mount made of natural rubber with no thread. It is identified by MPN 351-20-25-8.5-B-55 and SKU 420CR2. 3G Electric interprets demand and sources this genuine industrial mount across 14 departments—and far more—with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JW WINCO through-hole rubber bumper used for?
A JW WINCO through-hole rubber bumper is a plain bore vibration-isolating mount used to reduce vibration and noise in industrial machinery, pumps, and compressors. Its natural rubber construction absorbs shock and prevents metal-to-metal contact, extending equipment life.
What are the specifications of the JW WINCO 351-20-25-8.5-B-55 rubber bumper?
The JW WINCO 351-20-25-8.5-B-55 is a cylindrical through-hole rubber bumper made of natural rubber with no thread. It is a plain bore vibration-isolating mount designed for press-fit or bolt-through installation. 3G Electric supplies this genuine JW WINCO part worldwide.
Where to buy JW WINCO rubber bumpers worldwide?
3G Electric sources and delivers genuine JW WINCO through-hole rubber bumpers worldwide. We handle full logistics and customs clearance, ensuring you receive the correct industrial mount for your application. Contact us for availability and lead time on the MPN 351-20-25-8.5-B-55.
How to install a JW WINCO plain bore vibration mount?
To install a JW WINCO plain bore rubber bumper, press it into a mounting hole or pass a bolt through the center bore. Ensure the surface is clean and the mount is fully seated. Natural rubber should be protected from oil and extreme heat. 3G Electric can advise on selection for your specific load and vibration requirements.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO plain bore vibration-isolating mounts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
