JW WINCO Through-Hole Rubber Bumper: Cylindrical, Natural Rubber
The JW WINCO Through-Hole Rubber Bumper is a cylindrical plain bore vibration-isolating mount made from natural rubber with no thread. This SKU 420CV1 (MPN 351-25-15-10.5-B-40) provides a simple, non-threaded…
SKU 3G-OTH-598082
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Through-Hole Rubber Bumper is a cylindrical plain bore vibration-isolating mount made from natural rubber with no thread. This SKU 420CV1 (MPN 351-25-15-10.5-B-40) provides a simple, non-threaded isolation solution for industrial applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JW WINCO through-hole rubber bumper used for?
A JW WINCO through-hole rubber bumper is a plain bore vibration-isolating mount used to reduce transmitted vibration and shock in industrial machinery, pumps, and compressors. Its natural rubber construction provides effective damping and noise reduction in equipment mounting applications.
What are the specifications of the JW WINCO 351-25-15-10.5-B-40?
The JW WINCO 351-25-15-10.5-B-40 is a cylindrical through-hole rubber bumper made from natural rubber with no thread. It is a plain bore vibration-isolating mount designed for simple press-fit or bolt-through installation without threaded fasteners.
Where to buy JW WINCO rubber bumpers worldwide?
3G Electric supplies JW WINCO through-hole rubber bumpers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the 351-25-15-10.5-B-40 or other vibration-isolating mounts.
How to install a JW WINCO plain bore rubber bumper?
To install a JW WINCO plain bore rubber bumper, insert the bumper into a pre-drilled hole in the mounting surface. Use a bolt or rod through the center bore to secure the isolated component. Ensure the bumper is fully seated and not over-compressed for optimal vibration damping.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO plain bore vibration-isolating mounts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









