Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO 425-AL-10-120-EL Load-Rated Standard U Pull Handle - Load-Rated Standard "U" Pull Handles
JW WINCOLoad-Rated Standard "U" Pull Handles

JW WINCO 425-AL-10-120-EL Load-Rated Standard U Pull Handle

JW WINCO Pull Handle dengan tipe threaded holes adalah gagang tarik berbentuk "U" standar yang dirancang untuk aplikasi industri. Terbuat dari aluminium dengan warna silver, produk ini memiliki jarak antar lubang…

SKU 3G-OTH-505621

Juga terdaftar sebagai: 425AL10120EL · 425 AL 10 120 EL

Merek
JW WINCO
Item
425-AL-10-120-EL Load-Rated Standard U Pull Handle
Kategori
Load-Rated Standard "U" Pull Handles
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
425-AL-10-120-EL
Type
Aluminum, Silver, 4.72 in Mounting Hole Center to Center
Color
Silver
Screw Size
M5

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Pull Handle dengan tipe threaded holes adalah gagang tarik berbentuk "U" standar yang dirancang untuk aplikasi industri. Terbuat dari aluminium dengan warna silver, produk ini memiliki jarak antar lubang pemasangan 4.72 inci (120 mm) dan menggunakan ukuran sekrup M5. Gagang ini merupakan solusi andal untuk kebutuhan penarikan dan pembukaan pada peralatan industri, tersedia dengan nomor bagian 425-AL-10-120-EL.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Pull Handle 425-AL-10-120-EL?

JW WINCO Pull Handle 425-AL-10-120-EL terbuat dari aluminium dengan warna silver. Memiliki jarak antar lubang pemasangan 4.72 inci (120 mm) dan menggunakan ukuran sekrup M5. Produk ini adalah gagang tarik berbentuk "U" standar yang dirancang untuk aplikasi industri.

Untuk apa JW WINCO Pull Handle digunakan?

JW WINCO Pull Handle digunakan sebagai gagang tarik pada peralatan industri, seperti panel kontrol, lemari distribusi, atau mesin-mesin pabrik. Desain "U" standar memudahkan penarikan dan pembukaan, sementara material aluminium memberikan ketahanan dan ringan.

Di mana beli JW WINCO Pull Handle di Indonesia?

Anda dapat membeli JW WINCO Pull Handle melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda. Hubungi kami untuk informasi lebih lanjut.

Bagaimana cara memilih JW WINCO Pull Handle yang tepat?

Pilih JW WINCO Pull Handle berdasarkan jarak antar lubang pemasangan (mounting hole center to center) dan ukuran sekrup. Untuk model 425-AL-10-120-EL, jaraknya 4.72 inci (120 mm) dengan sekrup M5. Pastikan sesuai dengan lubang yang tersedia di peralatan Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO load-rated standard "u" pull handles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This load-rated standard U pull handle is made of aluminum with a silver finish. It features unthreaded holes with a 6.3 in mounting hole center-to-center spacing and uses M5 screws. Suitable for use on industrial enclosures, machinery doors, and access panels
JW WINCO
This load-rated standard U pull handle is made of aluminum with a silver finish. It features unthreaded holes with a 6.3 in mounting hole center-to-center spacing and uses M5 screws. Suitable for use on industrial enclosures, machinery doors, and access panels
This load-rated standard U pull handle is made of silver aluminum with a 19.69 in mounting hole center-to-center and M8 screw size. It is used on industrial enclosures, machinery doors, and access panels where a robust grip is required. Threaded holes simplify installation
JW WINCO
This load-rated standard U pull handle is made of silver aluminum with a 19.69 in mounting hole center-to-center and M8 screw size. It is used on industrial enclosures, machinery doors, and access panels where a robust grip is required. Threaded holes simplify installation
This load-rated standard U pull handle is made of silver aluminum with a 2.17 in mounting hole center-to-center and M5 screw size. It is designed for use on industrial enclosures, machine doors, and control panels where a secure grip is required
JW WINCO
This load-rated standard U pull handle is made of silver aluminum with a 2.17 in mounting hole center-to-center and M5 screw size. It is designed for use on industrial enclosures, machine doors, and control panels where a secure grip is required
This load-rated standard U pull handle is made of aluminum with a silver finish. It features unthreaded holes and a 7.87 in mounting hole center-to-center distance, using M5 screws. Suitable for use on industrial enclosures, machinery doors, and cabinets where a reliable hand grip is required
JW WINCO
This load-rated standard U pull handle is made of aluminum with a silver finish. It features unthreaded holes and a 7.87 in mounting hole center-to-center distance, using M5 screws. Suitable for use on industrial enclosures, machinery doors, and cabinets where a reliable hand grip is required
This load-rated standard U pull handle is made of aluminum with a silver finish. It features a 9.25 in mounting hole center-to-center distance and uses M5 screw size. Designed for use on industrial enclosures, machinery doors, and panel access points where a secure, ergonomic grip is required
JW WINCO
This load-rated standard U pull handle is made of aluminum with a silver finish. It features a 9.25 in mounting hole center-to-center distance and uses M5 screw size. Designed for use on industrial enclosures, machinery doors, and panel access points where a secure, ergonomic grip is required
Aluminum U pull handle with silver finish. Unthreaded holes with 7.72 in mounting hole center-to-center distance. Accepts #10 screws. Suitable for use on cabinets, enclosures, and machinery doors where a load-rated handle is required
JW WINCO
Aluminum U pull handle with silver finish. Unthreaded holes with 7.72 in mounting hole center-to-center distance. Accepts #10 screws. Suitable for use on cabinets, enclosures, and machinery doors where a load-rated handle is required
This load-rated standard U pull handle is made of silver aluminum and features a 7.56 in mounting hole center-to-center distance. It uses 5/16-18 threaded holes for secure mounting. Suitable for use on industrial machinery, enclosures, and heavy equipment doors requiring a strong grip
JW WINCO
This load-rated standard U pull handle is made of silver aluminum and features a 7.56 in mounting hole center-to-center distance. It uses 5/16-18 threaded holes for secure mounting. Suitable for use on industrial machinery, enclosures, and heavy equipment doors requiring a strong grip
This load-rated standard U pull handle is made of aluminum with a silver finish. It features a 15.75 in mounting hole center-to-center distance and uses M5 screws for secure attachment. Suitable for use on industrial enclosures, machinery doors, and panel applications
JW WINCO
This load-rated standard U pull handle is made of aluminum with a silver finish. It features a 15.75 in mounting hole center-to-center distance and uses M5 screws for secure attachment. Suitable for use on industrial enclosures, machinery doors, and panel applications