Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO 425-AL-8-96-SW Load-Rated Standard U Pull Handle - Load-Rated Standard "U" Pull Handles
JW WINCOLoad-Rated Standard "U" Pull Handles

JW WINCO 425-AL-8-96-SW Load-Rated Standard U Pull Handle

JW WINCO Pull Handle dengan Threaded Holes adalah gagang tarik tipe "U" standar berbahan aluminium berwarna hitam yang dirancang untuk aplikasi peralatan industri. Produk ini memiliki jarak antar lubang pemasangan…

SKU 3G-OTH-505672

Juga terdaftar sebagai: 425AL896SW · 425 AL 8 96 SW

Merek
JW WINCO
Item
425-AL-8-96-SW Load-Rated Standard U Pull Handle
Kategori
Load-Rated Standard "U" Pull Handles
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
425-AL-8-96-SW
Type
Aluminum, Black, 3.78 in Mounting Hole Center to Center
Color
Black
Screw Size
M4

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Pull Handle dengan Threaded Holes adalah gagang tarik tipe "U" standar berbahan aluminium berwarna hitam yang dirancang untuk aplikasi peralatan industri. Produk ini memiliki jarak antar lubang pemasangan sebesar 3,78 inci dan menggunakan ukuran sekrup M4, menjadikannya pilihan yang kokoh untuk panel atau lemari kontrol. Sebagai distributor resmi, 3G Electric menyediakan pull handle ini untuk kebutuhan industrial Anda di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Pull Handle 425-AL-8-96-SW?

JW WINCO Pull Handle 425-AL-8-96-SW terbuat dari aluminium dengan warna hitam, memiliki jarak antar lubang pemasangan 3,78 inci, dan menggunakan ukuran sekrup M4. Produk ini termasuk dalam kategori Load-Rated Standard "U" Pull Handles yang dirancang untuk aplikasi industri.

Untuk apa JW WINCO Pull Handle digunakan?

JW WINCO Pull Handle digunakan sebagai gagang tarik pada panel kontrol, lemari listrik, atau peralatan industri lainnya. Desain "U" standar dengan lubang berulir memudahkan pemasangan pada berbagai permukaan, memberikan pegangan yang kuat dan tahan lama.

Di mana beli JW WINCO Pull Handle di Indonesia?

Anda dapat membeli JW WINCO Pull Handle 425-AL-8-96-SW melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Bagaimana cara memasang JW WINCO Pull Handle?

Pemasangan JW WINCO Pull Handle cukup sederhana karena dilengkapi lubang berulir (threaded holes) dengan ukuran sekrup M4. Cukup sejajarkan lubang pada permukaan panel atau lemari, lalu kencangkan sekrup M4 yang sesuai. Pastikan jarak antar lubang pemasangan 3,78 inci terpenuhi.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO load-rated standard "u" pull handles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This load-rated standard U pull handle is constructed from black aluminum with threaded holes. It features an 11.81 in mounting hole center-to-center distance and uses M5 screws. Suitable for use on industrial enclosures, machinery doors, and panel access points
JW WINCO
This load-rated standard U pull handle is constructed from black aluminum with threaded holes. It features an 11.81 in mounting hole center-to-center distance and uses M5 screws. Suitable for use on industrial enclosures, machinery doors, and panel access points
This load-rated standard U pull handle is made of silver aluminum with an 11.81-inch mounting hole center-to-center distance and 5/16"-18 threaded holes. It is used on industrial cabinets, enclosures, and machinery doors where a strong, ergonomic grip is required
JW WINCO
This load-rated standard U pull handle is made of silver aluminum with an 11.81-inch mounting hole center-to-center distance and 5/16"-18 threaded holes. It is used on industrial cabinets, enclosures, and machinery doors where a strong, ergonomic grip is required
Silver aluminum U pull handle with threaded holes for mounting. Load-rated for use on industrial enclosures, cabinets, and machinery. Features 4.61 in mounting hole center-to-center distance and 5/16-18 screw size
JW WINCO
Silver aluminum U pull handle with threaded holes for mounting. Load-rated for use on industrial enclosures, cabinets, and machinery. Features 4.61 in mounting hole center-to-center distance and 5/16-18 screw size
This load-rated standard U pull handle is made of black aluminum with a 6.3 in mounting hole center-to-center distance. It features threaded holes for M5 screws, enabling secure attachment to industrial enclosures, machinery doors, and panel applications
JW WINCO
This load-rated standard U pull handle is made of black aluminum with a 6.3 in mounting hole center-to-center distance. It features threaded holes for M5 screws, enabling secure attachment to industrial enclosures, machinery doors, and panel applications
This load-rated standard U pull handle is constructed of black aluminum with a 13.78 in mounting hole center-to-center dimension. It features threaded holes and uses M10 screws for secure attachment. Suitable for use on industrial enclosures, machinery doors, and access panels
JW WINCO
This load-rated standard U pull handle is constructed of black aluminum with a 13.78 in mounting hole center-to-center dimension. It features threaded holes and uses M10 screws for secure attachment. Suitable for use on industrial enclosures, machinery doors, and access panels
Aluminum U pull handle with silver finish. Features unthreaded holes for 1/4 in screws and 6.3 in mounting hole center-to-center distance. Suitable for use on industrial enclosures, cabinets, and machinery doors requiring a load-rated grip
JW WINCO
Aluminum U pull handle with silver finish. Features unthreaded holes for 1/4 in screws and 6.3 in mounting hole center-to-center distance. Suitable for use on industrial enclosures, cabinets, and machinery doors requiring a load-rated grip
This load-rated standard U pull handle is made of aluminum with a silver finish. It features a 7.56 in mounting hole center-to-center distance and M8 screw size. Suitable for opening or closing heavy doors, panels, and enclosures in industrial environments
JW WINCO
This load-rated standard U pull handle is made of aluminum with a silver finish. It features a 7.56 in mounting hole center-to-center distance and M8 screw size. Suitable for opening or closing heavy doors, panels, and enclosures in industrial environments
This load-rated standard U pull handle is made of aluminum with a silver finish. It features unthreaded holes and a 7.72 in mounting hole center-to-center distance, accepting 1/4 in screws. Suitable for use on industrial enclosures, machinery doors, and access panels requiring a strong grip
JW WINCO
This load-rated standard U pull handle is made of aluminum with a silver finish. It features unthreaded holes and a 7.72 in mounting hole center-to-center distance, accepting 1/4 in screws. Suitable for use on industrial enclosures, machinery doors, and access panels requiring a strong grip