Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Corrosion-Resistant Stainless Steel Clevis Fork Head - Corrosion-Resistant Stainless Steel Clevis Fork Heads
JW WINCOCorrosion-Resistant Stainless Steel Clevis Fork Heads

JW WINCO Corrosion-Resistant Stainless Steel Clevis Fork Head

JW WINCO Clevis Rod Ends adalah komponen sambungan mekanis berbahan stainless steel yang dirancang untuk aplikasi industri yang memerlukan ketahanan korosi tinggi. Tipe ini memiliki ukuran tap M4, ulir kanan (Right…

SKU 3G-OTH-161784

Juga terdaftar sebagai: 4 NXBCS · 4-NXBCS

Merek
JW WINCO
Item
Corrosion-Resistant Stainless Steel Clevis Fork Head
Kategori
Corrosion-Resistant Stainless Steel Clevis Fork Heads
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
4NXBCS
Type
Plain, M4 Tap Size, Right Hand, Clevis End
Body Wd
8 mm

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Clevis Rod Ends adalah komponen sambungan mekanis berbahan stainless steel yang dirancang untuk aplikasi industri yang memerlukan ketahanan korosi tinggi. Tipe ini memiliki ukuran tap M4, ulir kanan (Right Hand), dengan lebar badan 8 mm. Produk dengan nomor bagian 4NXBCS ini cocok digunakan sebagai ujung garpu (clevis fork head) pada sistem aktuasi atau pengaturan posisi di peralatan pembakaran dan ketel uap.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Clevis Rod Ends 4NXBCS?

JW WINCO Clevis Rod Ends 4NXBCS memiliki tipe Plain dengan ukuran tap M4, ulir kanan (Right Hand), dan lebar badan 8 mm. Bahan stainless steel membuatnya tahan korosi, cocok untuk lingkungan industri yang lembab atau terkena bahan kimia.

Untuk apa JW WINCO Clevis Rod Ends digunakan?

Clevis Rod Ends ini digunakan sebagai ujung sambungan garpu (clevis fork head) pada sistem mekanis yang memerlukan gerakan putar atau ayun, misalnya pada linkage katup gas, aktuator, atau pengatur posisi di peralatan pembakaran industri.

Di mana beli JW WINCO Clevis Rod Ends di Indonesia?

Anda dapat membeli JW WINCO Clevis Rod Ends 4NXBCS melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda tidak perlu repes.

Bagaimana cara memilih Clevis Rod Ends yang tepat?

Pilih Clevis Rod Ends berdasarkan ukuran tap (M4), arah ulir (Right Hand), lebar badan (8 mm), dan bahan (stainless steel untuk ketahanan korosi). Pastikan sesuai dengan beban dan lingkungan aplikasi Anda. JW WINCO 4NXBCS memenuhi spesifikasi tersebut.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant stainless steel clevis fork heads. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators
JW WINCO
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators
This clevis fork joint features a black anodized aluminum body for wear resistance. It has an M4 tap size with right-hand threading and an 8 mm body width. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint features a black anodized aluminum body for wear resistance. It has an M4 tap size with right-hand threading and an 8 mm body width. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO Quick-Release Hoist Ring: Stainless Steel, 4,047 lbf Load Limit, 1"-8 Thread Size (MPN 1135-1X8-1.063-NI)
JW WINCO
JW WINCO Quick-Release Hoist Ring: Stainless Steel, 4,047 lbf Load Limit, 1"-8 Thread Size (MPN 1135-1X8-1.063-NI)
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This clevis fork head is made of corrosion-resistant stainless steel for use in industrial linkage systems. It features a plain clevis end with M5 tap size, right-hand thread, and 10 mm body width. Suitable for connecting threaded rods to clevis pins in machinery, actuators, and conveyor systems
JW WINCO
This clevis fork head is made of corrosion-resistant stainless steel for use in industrial linkage systems. It features a plain clevis end with M5 tap size, right-hand thread, and 10 mm body width. Suitable for connecting threaded rods to clevis pins in machinery, actuators, and conveyor systems
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M4 tap and an 8 mm body width. Used to connect a threaded rod or cable to a clevis pin, enabling pivoting motion in mechanical linkages
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M4 tap and an 8 mm body width. Used to connect a threaded rod or cable to a clevis pin, enabling pivoting motion in mechanical linkages
This clevis fork head is made of corrosion-resistant stainless steel for use in industrial linkage applications. It features a plain design, M5 tap size, right-hand thread, and 10 mm body width. Suitable for connecting rods or cables in machinery requiring a pivot point
JW WINCO
This clevis fork head is made of corrosion-resistant stainless steel for use in industrial linkage applications. It features a plain design, M5 tap size, right-hand thread, and 10 mm body width. Suitable for connecting rods or cables in machinery requiring a pivot point
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. Used in mechanical linkages to connect a rod to a clevis pin in industrial machinery and actuation systems
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. Used in mechanical linkages to connect a rod to a clevis pin in industrial machinery and actuation systems
Stainless steel clevis fork head with plain design, M6 tap size, right-hand thread, and 12 mm body width. Used to connect a rod to a clevis pin in mechanical linkages for industrial machinery, automation, and material handling systems requiring corrosion resistance
JW WINCO
Stainless steel clevis fork head with plain design, M6 tap size, right-hand thread, and 12 mm body width. Used to connect a rod to a clevis pin in mechanical linkages for industrial machinery, automation, and material handling systems requiring corrosion resistance
This clevis fork head is made from corrosion-resistant stainless steel, suitable for mechanical linkages in environments where rust resistance is required. It features a plain type, M10 tap size, right-hand thread, and 20 mm body width. Used to connect a rod to a clevis pin in industrial machinery, actuators, and automation systems
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel, suitable for mechanical linkages in environments where rust resistance is required. It features a plain type, M10 tap size, right-hand thread, and 20 mm body width. Used to connect a rod to a clevis pin in industrial machinery, actuators, and automation systems
This clevis fork head is made from corrosion-resistant stainless steel for use in mechanical linkages. It features a plain design with an M10 tap size and right-hand thread orientation. The body width is 20 mm. Typical applications include connecting rods to fixed points in industrial machinery and actuation systems
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel for use in mechanical linkages. It features a plain design with an M10 tap size and right-hand thread orientation. The body width is 20 mm. Typical applications include connecting rods to fixed points in industrial machinery and actuation systems