Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Corrosion-Resistant 4-Arm Knob with Threaded Hole - Corrosion-Resistant 4-Arm Knobs with Threaded Hole
JW WINCOCorrosion-Resistant 4-Arm Knobs with Threaded Hole

JW WINCO Corrosion-Resistant 4-Arm Knob with Threaded Hole

JW WINCO Stainless Steel Hand Knob adalah knop 4 lengan berbahan stainless steel yang dirancang tahan korosi untuk aplikasi industri. Produk ini memiliki ulir 1/2"-13 dengan nomor bagian 6335-NI-63-1/2X13-E, cocok…

SKU 3G-OTH-521799

Juga terdaftar sebagai: 6335NI6312X13E · 6335 NI 63 1 2X13 E · 6335-NI-63-1-2X13-E

Merek
JW WINCO
Item
Corrosion-Resistant 4-Arm Knob with Threaded Hole
Kategori
Corrosion-Resistant 4-Arm Knobs with Threaded Hole
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
6335-NI-63-1/2X13-E
Thread
1/2"-13
Stainless Steel 4-Prong Knob
Stainless Steel

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Stainless Steel Hand Knob adalah knop 4 lengan berbahan stainless steel yang dirancang tahan korosi untuk aplikasi industri. Produk ini memiliki ulir 1/2"-13 dengan nomor bagian 6335-NI-63-1/2X13-E, cocok digunakan sebagai pegangan pada peralatan pembakaran, katup gas, atau komponen mesin lainnya yang memerlukan ketahanan terhadap lingkungan lembap atau kimia. Knop ini merupakan pilihan tepat untuk penggantian suku cadang di berbagai peralatan industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Stainless Steel Hand Knob?

JW WINCO Stainless Steel Hand Knob memiliki ulir 1/2"-13, nomor bagian 6335-NI-63-1/2X13-E, dan terbuat dari stainless steel 4 lengan yang tahan korosi. Produk ini dirancang untuk aplikasi industri yang membutuhkan pegangan kuat dan tahan lama.

Untuk apa JW WINCO Stainless Steel Hand Knob digunakan?

Knop ini digunakan sebagai pegangan pada peralatan industri seperti katup gas, regulator tekanan, atau komponen mesin yang memerlukan penanganan manual. Material stainless steel membuatnya ideal untuk lingkungan korosif atau area dengan kelembapan tinggi.

Di mana beli JW WINCO Stainless Steel Hand Knob di Indonesia?

Anda dapat membeli JW WINCO Stainless Steel Hand Knob melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat fokus pada kebutuhan teknis tanpa repot.

Bagaimana cara memilih JW WINCO Stainless Steel Hand Knob yang tepat?

Pastikan ulir knop sesuai dengan kebutuhan Anda, yaitu 1/2"-13. Periksa juga nomor bagian 6335-NI-63-1/2X13-E untuk memastikan kompatibilitas dengan peralatan yang ada. Material stainless steel memberikan ketahanan korosi yang baik untuk lingkungan industri.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant 4-arm knobs with threaded hole. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This 4-arm knob is made of stainless steel and features an M6 threaded hole. It is designed for manual adjustment and clamping in applications where corrosion resistance is needed
JW WINCO
This 4-arm knob is made of stainless steel and features an M6 threaded hole. It is designed for manual adjustment and clamping in applications where corrosion resistance is needed
This 4-arm knob features a threaded hole with 1/4"-20 thread and is made entirely of stainless steel for corrosion resistance. The four-prong design provides a secure grip for manual adjustment and clamping in environments where standard knobs may corrode
JW WINCO
This 4-arm knob features a threaded hole with 1/4"-20 thread and is made entirely of stainless steel for corrosion resistance. The four-prong design provides a secure grip for manual adjustment and clamping in environments where standard knobs may corrode
Stainless steel 4-arm knob with M10 threaded hole. Designed for manual adjustment and clamping in industrial machinery and fixtures where corrosion resistance is required
JW WINCO
Stainless steel 4-arm knob with M10 threaded hole. Designed for manual adjustment and clamping in industrial machinery and fixtures where corrosion resistance is required
Stainless steel 4-prong knob with M12 threaded hole for manual adjustment and clamping. Corrosion-resistant construction suited for environments requiring non-corrosive hardware
JW WINCO
Stainless steel 4-prong knob with M12 threaded hole for manual adjustment and clamping. Corrosion-resistant construction suited for environments requiring non-corrosive hardware
This 4-arm knob is made of stainless steel for corrosion resistance. It features a 3/8"-16 threaded hole for manual adjustment on machinery, valves, and controls where frequent hand tightening is required
JW WINCO
This 4-arm knob is made of stainless steel for corrosion resistance. It features a 3/8"-16 threaded hole for manual adjustment on machinery, valves, and controls where frequent hand tightening is required
This 4-arm knob features a threaded hole with 5/16"-18 thread and is made of stainless steel for corrosion resistance. It is used for manual adjustment and clamping in industrial machinery, fixtures, and equipment where resistance to corrosive environments is required
JW WINCO
This 4-arm knob features a threaded hole with 5/16"-18 thread and is made of stainless steel for corrosion resistance. It is used for manual adjustment and clamping in industrial machinery, fixtures, and equipment where resistance to corrosive environments is required
This 4-arm knob is made of stainless steel for corrosion resistance. It features an M8 threaded hole for attachment to threaded studs or bolts. Commonly used for adjustment, clamping, and positioning on machinery and fixtures
JW WINCO
This 4-arm knob is made of stainless steel for corrosion resistance. It features an M8 threaded hole for attachment to threaded studs or bolts. Commonly used for adjustment, clamping, and positioning on machinery and fixtures