Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Damping Washer for Two-Piece Shaft Collars - Damping Washers for Two-Piece Shaft Collars
JW WINCODamping Washers for Two-Piece Shaft Collars

JW WINCO Damping Washer for Two-Piece Shaft Collars

JW WINCO Damping Washer adalah komponen peredam getaran yang dirancang khusus untuk seri GN 7072 Two-Piece Shaft Collars. Produk ini memiliki spesifikasi tipe 2-Piece, untuk poros 12 mm, dengan diameter collar poros…

SKU 3G-OTH-133133

Juga terdaftar sebagai: 70723030B12 · 7072 30 30 B12 · 7072-30-30-B12

Merek
JW WINCO
Item
Damping Washer for Two-Piece Shaft Collars
Kategori
Damping Washers for Two-Piece Shaft Collars
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
7072.30-30-B12
Type
2-Piece, For 12 mm Shafts, For 30 mm Shaft Collar Dia

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Damping Washer adalah komponen peredam getaran yang dirancang khusus untuk seri GN 7072 Two-Piece Shaft Collars. Produk ini memiliki spesifikasi tipe 2-Piece, untuk poros 12 mm, dengan diameter collar poros 30 mm. Terbuat dari Polyurethane Elastomer dengan lapisan Acrylate Dispersion, damping washer ini memiliki nomor model 7072.3-30-B12-NI dan warna Transparan. Damping washer ini ideal untuk aplikasi yang memerlukan pengurangan getaran pada sistem transmisi mekanis di berbagai peralatan industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi JW WINCO Damping Washer untuk GN 7072 Series?

JW WINCO Damping Washer berfungsi sebagai peredam getaran pada Two-Piece Shaft Collars seri GN 7072. Produk ini membantu mengurangi kebisingan dan keausan pada komponen mesin dengan menyerap getaran yang timbul selama operasi. Spesifikasinya mencakup tipe 2-Piece, untuk poros 12 mm, dan diameter collar poros 30 mm.

Apa spesifikasi teknis JW WINCO Damping Washer 7072.30-30-B12?

Spesifikasi teknis JW WINCO Damping Washer ini meliputi tipe 2-Piece, untuk poros 12 mm, diameter collar poros 30 mm, bahan Polyurethane Elastomer, lapisan Acrylate Dispersion, nomor model 7072.3-30-B12-NI, dan warna Transparan. Nomor bagian pabrikan adalah 7072.30-30-B12.

Di mana beli JW WINCO Damping Washer di Indonesia?

Anda dapat membeli JW WINCO Damping Washer asli melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi industri Anda. Hubungi kami untuk minta penawaran.

Bagaimana cara memilih JW WINCO Damping Washer yang tepat?

Untuk memilih JW WINCO Damping Washer yang tepat, pastikan Anda mencocokkan spesifikasi dengan kebutuhan aplikasi. Produk ini dirancang untuk poros 12 mm dengan diameter collar poros 30 mm pada seri GN 7072 Two-Piece Shaft Collars. Periksa juga nomor model 7072.3-30-B12-NI untuk memastikan kesesuaian.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO damping washers for two-piece shaft collars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This stainless steel shaft collar features a 2-piece clamp-on design for secure positioning on shafts without marring the surface. It has a metric bore with inch dimensions and a 15 mm collar width. Used in power transmission applications to locate and secure components on shafts
RULAND MANUFACTURING
This stainless steel shaft collar features a 2-piece clamp-on design for secure positioning on shafts without marring the surface. It has a metric bore with inch dimensions and a 15 mm collar width. Used in power transmission applications to locate and secure components on shafts
This aluminum shaft collar is a two-piece, clamp-on design with a round profile. It features a metric bore with an inch bore size and a 19 mm collar width. Used for positioning or limiting axial movement of components on a shaft in motion control, packaging, and automation equipment
RULAND MANUFACTURING
This aluminum shaft collar is a two-piece, clamp-on design with a round profile. It features a metric bore with an inch bore size and a 19 mm collar width. Used for positioning or limiting axial movement of components on a shaft in motion control, packaging, and automation equipment
Metric round clamp-on shaft collar with 24 mm bore diameter and 15 mm width. Two-piece stainless steel design secures components on shafts without marring the surface. Used for axial positioning in industrial machinery, conveyors, and automation equipment
RULAND MANUFACTURING
Metric round clamp-on shaft collar with 24 mm bore diameter and 15 mm width. Two-piece stainless steel design secures components on shafts without marring the surface. Used for axial positioning in industrial machinery, conveyors, and automation equipment
This stainless steel shaft collar features a 2-piece clamp-on design for secure positioning on shafts without marring. It has a metric design with an inch bore and a 15 mm collar width. Used in power transmission applications to locate components, limit axial movement, or serve as a mechanical stop
RULAND MANUFACTURING
This stainless steel shaft collar features a 2-piece clamp-on design for secure positioning on shafts without marring. It has a metric design with an inch bore and a 15 mm collar width. Used in power transmission applications to locate components, limit axial movement, or serve as a mechanical stop
This stainless steel shaft collar from RULAND MANUFACTURING is a 2-piece, clamp-on type with a metric bore and inch bore, round design. It has a 15 mm collar width and is used to position, secure, or limit components on shafts in industrial machinery, conveyors, and automation systems. The stainless steel construction provides corrosion resistance in harsh environments
RULAND MANUFACTURING
This stainless steel shaft collar from RULAND MANUFACTURING is a 2-piece, clamp-on type with a metric bore and inch bore, round design. It has a 15 mm collar width and is used to position, secure, or limit components on shafts in industrial machinery, conveyors, and automation systems. The stainless steel construction provides corrosion resistance in harsh environments
This stainless steel shaft collar is a 2-piece, clamp-on type with a round profile. It features a metric design with an inch bore and a 19 mm collar width. Used for positioning and securing components on shafts in industrial machinery, motion control, and automation systems
RULAND MANUFACTURING
This stainless steel shaft collar is a 2-piece, clamp-on type with a round profile. It features a metric design with an inch bore and a 19 mm collar width. Used for positioning and securing components on shafts in industrial machinery, motion control, and automation systems

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This damping washer is a 2-piece component for two-piece shaft collars, designed for 32 mm shafts and 60 mm shaft collar diameters. It is made of transparent polyurethane elastomer with an acrylate dispersion. The washer provides a cushioned interface to reduce vibration and noise in power transmission systems
JW WINCO
This damping washer is a 2-piece component for two-piece shaft collars, designed for 32 mm shafts and 60 mm shaft collar diameters. It is made of transparent polyurethane elastomer with an acrylate dispersion. The washer provides a cushioned interface to reduce vibration and noise in power transmission systems
Damping washer for two-piece shaft collars, designed for 30 mm shafts and 55 mm shaft collar diameters. Constructed from polyurethane elastomer with an acrylate dispersion, featuring a transparent finish. Used to reduce vibration and noise at the interface between metal components in power transmission systems
JW WINCO
Damping washer for two-piece shaft collars, designed for 30 mm shafts and 55 mm shaft collar diameters. Constructed from polyurethane elastomer with an acrylate dispersion, featuring a transparent finish. Used to reduce vibration and noise at the interface between metal components in power transmission systems
This damping washer is designed for use with two-piece shaft collars to reduce vibration and noise in rotating assemblies. It fits 28 mm shafts and 55 mm shaft collar diameters. The washer is made of transparent polyurethane elastomer with an acrylate dispersion
JW WINCO
This damping washer is designed for use with two-piece shaft collars to reduce vibration and noise in rotating assemblies. It fits 28 mm shafts and 55 mm shaft collar diameters. The washer is made of transparent polyurethane elastomer with an acrylate dispersion
Damping washer for two-piece shaft collars. Designed for 14 mm shafts and 32 mm shaft collar diameter. Constructed from transparent polyurethane elastomer with acrylate dispersion. Used to reduce vibration and noise in shaft collar assemblies
JW WINCO
Damping washer for two-piece shaft collars. Designed for 14 mm shafts and 32 mm shaft collar diameter. Constructed from transparent polyurethane elastomer with acrylate dispersion. Used to reduce vibration and noise in shaft collar assemblies
Damping washer for two-piece shaft collars, designed to reduce vibration and noise in rotating assemblies. Fits 40 mm shafts with 65 mm shaft collar diameter. Constructed from polyurethane elastomer with acrylate dispersion. Suitable for industrial machinery and automation applications requiring precise shaft alignment and damping
JW WINCO
Damping washer for two-piece shaft collars, designed to reduce vibration and noise in rotating assemblies. Fits 40 mm shafts with 65 mm shaft collar diameter. Constructed from polyurethane elastomer with acrylate dispersion. Suitable for industrial machinery and automation applications requiring precise shaft alignment and damping
Damping washer for two-piece shaft collars, designed for 22 mm shafts and 48 mm shaft collar diameter. Made of polyurethane elastomer with acrylate dispersion, transparent. Reduces vibration and noise in shaft collar assemblies for industrial machinery and automation equipment
JW WINCO
Damping washer for two-piece shaft collars, designed for 22 mm shafts and 48 mm shaft collar diameter. Made of polyurethane elastomer with acrylate dispersion, transparent. Reduces vibration and noise in shaft collar assemblies for industrial machinery and automation equipment
This damping washer is a two-piece component designed for use with two-piece shaft collars. It fits 20 mm shafts and 42 mm shaft collar diameters. The washer is made from transparent polyurethane elastomer with an acrylate dispersion, intended to dampen vibration and reduce noise in shaft-collar assemblies
JW WINCO
This damping washer is a two-piece component designed for use with two-piece shaft collars. It fits 20 mm shafts and 42 mm shaft collar diameters. The washer is made from transparent polyurethane elastomer with an acrylate dispersion, intended to dampen vibration and reduce noise in shaft-collar assemblies
This damping washer is designed for use with two-piece shaft collars, fitting 35 mm shafts and 60 mm shaft collar diameters. It is made from polyurethane elastomer with an acrylate dispersion coating and has a transparent finish. The washer helps reduce vibration and noise in applications such as industrial machinery, conveyor systems, and automation equipment
JW WINCO
This damping washer is designed for use with two-piece shaft collars, fitting 35 mm shafts and 60 mm shaft collar diameters. It is made from polyurethane elastomer with an acrylate dispersion coating and has a transparent finish. The washer helps reduce vibration and noise in applications such as industrial machinery, conveyor systems, and automation equipment