JW WINCO Vibration-Isolating Mount: Cylindrical, Natural Rubber
The JW WINCO Vibration-Isolating Mount is a cylindrical, male x non-threaded isolator with a natural rubber body (MPN 352-40-25-M8-S-40). 3G Electric interprets this demand and sources it across 14 industrial…
SKU 3G-OTH-524168
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Vibration-Isolating Mount is a cylindrical, male x non-threaded isolator with a natural rubber body (MPN 352-40-25-M8-S-40). 3G Electric interprets this demand and sources it across 14 industrial departments, with specialist depth in controls to support your application.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JW WINCO vibration-isolating mount used for?
A JW WINCO vibration-isolating mount reduces transmitted vibration from rotating or reciprocating machinery. Its natural rubber body dampens noise and shock in industrial equipment such as pumps, compressors, and conveyors. 3G Electric sources this mount across 14 industrial departments to support your application.
What are the specifications of the JW WINCO 352-40-25-M8-S-40 mount?
The JW WINCO 352-40-25-M8-S-40 is a cylindrical, male x non-threaded vibration-isolating mount with a natural rubber body. The isolator body material is natural rubber. 3G Electric supplies this part and can provide technical support for your specific machinery requirements.
Where to buy JW WINCO vibration-isolating mounts worldwide?
3G Electric supplies JW WINCO vibration-isolating mounts worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us to order the 352-40-25-M8-S-40 or other JW WINCO isolators for your industrial application.
How to install a JW WINCO male x non-threaded vibration mount?
Install the JW WINCO male x non-threaded mount by threading the male stud into a tapped hole on the supported equipment. Ensure the non-threaded base sits flush on the mounting surface. Tighten to the manufacturer's recommended torque. 3G Electric can advise on proper selection for your load and environment.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO male x non-threaded vibration-isolating mounts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









