JW WINCO Pull Handle: Threaded Holes, Aluminum, Silver
The JW WINCO Pull Handle is a load-rated standard 'U' pull handle with threaded holes, constructed from aluminum in a silver finish. It features a 4.72-inch mounting hole center-to-center distance and uses M4 screws…
SKU 3G-OTH-505618
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Pull Handle is a load-rated standard 'U' pull handle with threaded holes, constructed from aluminum in a silver finish. It features a 4.72-inch mounting hole center-to-center distance and uses M4 screws (MPN 425-AL-8-120-EL).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the JW WINCO Pull Handle 425-AL-8-120-EL used for?
This load-rated standard 'U' pull handle is used on industrial enclosures, cabinets, and machinery doors where a secure, ergonomic grip is needed. Its threaded M4 holes allow direct mounting without separate nuts, making it suitable for panel doors in electrical, machining, and material handling applications.
What are the specifications of the JW WINCO Pull Handle 425-AL-8-120-EL?
The JW WINCO 425-AL-8-120-EL is an aluminum, silver-finished pull handle with a 4.72-inch mounting hole center-to-center distance. It uses M4 screws and is load-rated for standard-duty use. The threaded holes simplify installation on enclosures and equipment panels.
Where to buy the JW WINCO Pull Handle 425-AL-8-120-EL worldwide?
3G Electric supplies the JW WINCO Pull Handle 425-AL-8-120-EL to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this load-rated aluminum pull handle.
How to install the JW WINCO Pull Handle 425-AL-8-120-EL?
Install the JW WINCO pull handle by aligning its threaded M4 holes with the pre-drilled mounting holes on your panel or door. Insert M4 screws through the panel from the inside and tighten securely. No additional nuts are needed because the handle holes are threaded. Use a torque wrench to avoid over-tightening the aluminum.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO load-rated standard "u" pull handles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









