JW WINCO Hand Knobs with Loss Protection: 7 Point, Plastic w/ SS Thread, M6 Thread
The JW WINCO Hand Knobs with Loss Protection: 7 Point are 7-arm knobs with a threaded hole, featuring a plastic body with stainless steel M6 thread and a 12 mm thread length (MPN 6NE01/E). These knobs are designed…
SKU 3G-OTH-524885
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Hand Knobs with Loss Protection: 7 Point are 7-arm knobs with a threaded hole, featuring a plastic body with stainless steel M6 thread and a 12 mm thread length (MPN 6NE01/E). These knobs are designed for secure manual adjustment and retention in industrial equipment.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JW WINCO 7-arm hand knob with loss protection used for?
JW WINCO 7-arm hand knobs with loss protection are used for secure manual adjustment and retention on industrial equipment. The 7-point design provides a firm grip, while the stainless steel M6 thread resists corrosion. They are common on machinery guards, clamps, and positioning fixtures where a captive fastener prevents misplacement.
What are the specifications of the JW WINCO 6NE01/E hand knob?
The JW WINCO 6NE01/E is a 7-arm hand knob with a plastic body and a stainless steel M6 threaded insert. Thread length is 12 mm. It is designed for loss protection, meaning the knob remains captive to the equipment during adjustment. The part number is 6NE01/E.
Where to buy JW WINCO hand knobs worldwide?
3G Electric supplies JW WINCO hand knobs worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we source genuine JW WINCO parts like the 6NE01/E 7-arm knob with M6 thread and loss protection. Contact us for a quote and lead time.
How to install a JW WINCO loss-protection hand knob?
Installation is straightforward: thread the M6 stud into the mating hole on your equipment until snug. The loss-protection feature keeps the knob attached to the panel or guard when loosened, preventing drops. Use hand-tightening only; over-torquing can damage the plastic body. No special tools are required.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO 7-arm knobs with threaded hole. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
