JW WINCO Plastic Hand Knob w/ Stainless Steel Stud w/ Swivel Thrust Pad: 7 Point
The JW WINCO Plastic Hand Knob with Stainless Steel Stud and Swivel Thrust Pad is a 7-arm knob with a 7-point thrust pad, M8 thread, and a 25 mm pad base diameter (MPN 6336.12-40-M8-50-25). This component is designed…
SKU 3G-OTH-540052
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Plastic Hand Knob with Stainless Steel Stud and Swivel Thrust Pad is a 7-arm knob with a 7-point thrust pad, M8 thread, and a 25 mm pad base diameter (MPN 6336.12-40-M8-50-25). This component is designed for manual adjustment and clamping applications requiring a swiveling pad.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the JW WINCO Plastic Hand Knob with Swivel Thrust Pad used for?
This 7-arm knob with M8 threaded stud and swiveling thrust pad is used for manual clamping and adjustment in jigs, fixtures, and machinery. The pad rotates to apply even pressure on workpieces without marring surfaces, common in industrial assembly and positioning applications.
What are the specifications of the JW WINCO 6336.12-40-M8-50-25?
The JW WINCO Plastic Hand Knob features a 7-point swivel thrust pad, M8 thread, and a 25 mm pad base diameter. It has a stainless steel stud and a 7-arm plastic handle design. The manufacturer part number is 6336.12-40-M8-50-25.
Where to buy the JW WINCO Plastic Hand Knob with Swivel Thrust Pad worldwide?
3G Electric supplies the JW WINCO Plastic Hand Knob with Swivel Thrust Pad (MPN 6336.12-40-M8-50-25) to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive the correct component for your clamping application.
How to install the JW WINCO Plastic Hand Knob with Swivel Thrust Pad?
Install the JW WINCO knob by threading the M8 stud into a matching threaded hole or nut. The swivel thrust pad self-aligns against the workpiece. Tighten by hand until the pad contacts the surface; avoid over-torquing to prevent damage to the plastic handle.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO 7-arm knobs with swivel thrust pad & threaded stud. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
