JW WINCO Hand Knobs; Eight-Lobed Knobs: Plastic w/ Steel Thread, M8 Thread
The JW WINCO Hand Knob is an 8-Arm Knob with Threaded Stud, featuring an M8 thread and a 35 mm thread length. This eight-lobed knob is constructed from plastic with a steel thread (MPN 6302075). 3G Electric…
SKU 3G-OTH-521288
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Hand Knob is an 8-Arm Knob with Threaded Stud, featuring an M8 thread and a 35 mm thread length. This eight-lobed knob is constructed from plastic with a steel thread (MPN 6302075). 3G Electric interprets your demand for this OEM part and delivers it across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JW WINCO eight-lobed hand knob used for?
A JW WINCO eight-lobed hand knob provides a manual grip for adjusting, clamping, or positioning machinery components. Its plastic body with steel M8 threaded stud suits light-duty industrial applications where frequent hand tightening is needed, such as on jigs, fixtures, or control panels.
What are the specifications of the JW WINCO 6302075 hand knob?
The JW WINCO 6302075 hand knob is an eight-lobed knob with a threaded stud. It has an M8 thread, 35 mm thread length, and is made of plastic with a steel thread insert. The manufacturer part number is 6302075.
Where to buy JW WINCO hand knobs worldwide?
3G Electric supplies JW WINCO hand knobs worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we interpret your demand and deliver this OEM part across 14 industrial departments, including specialist expertise in combustion, pumps, and controls.
How to install a JW WINCO threaded stud hand knob?
To install a JW WINCO hand knob, align the M8 threaded stud with the mating threaded hole and hand-tighten clockwise until secure. Avoid over-tightening to prevent damage to the plastic body. Use a thread-locking compound if vibration is present. Always verify thread compatibility before installation.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO 8-arm knobs with threaded stud. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
