JW WINCO Quick-Release Hoist Ring: Steel, 3.9 kN Load Limit, M10 Thread Size
The JW WINCO Quick-Release Hoist Ring is a steel quick-release threaded pivot-only hoist ring designed for lifting operations. It features an M10 thread size, a 14 mm working pin length, and a working load limit for…
SKU 3G-OTH-343173
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Quick-Release Hoist Ring is a steel quick-release threaded pivot-only hoist ring designed for lifting operations. It features an M10 thread size, a 14 mm working pin length, and a working load limit for side load of 1.5 kN (337 lbf). The manufacturer part number is 1133-M10-14-ST.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the JW WINCO Quick-Release Hoist Ring used for?
The JW WINCO Quick-Release Hoist Ring is used for lifting operations where a secure, pivot-only attachment point is needed. It is commonly applied in industrial rigging, machinery handling, and overhead lifting tasks. The steel construction and M10 thread size make it suitable for moderate-load applications up to 3.9 kN.
What are the specifications of the JW WINCO Quick-Release Hoist Ring?
The JW WINCO Quick-Release Hoist Ring (MPN 1133-M10-14-ST) has a load limit of 3.9 kN, a side-load working limit of 1.5 kN (337 lbf), an M10 thread size, a 14 mm working pin length, and is made of steel. It is a threaded pivot-only hoist ring designed for lifting operations.
Where to buy the JW WINCO Quick-Release Hoist Ring worldwide?
You can source the JW WINCO Quick-Release Hoist Ring through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this part.
How to install the JW WINCO Quick-Release Hoist Ring?
Install the JW WINCO Quick-Release Hoist Ring by threading the M10 stud into a compatible tapped hole until fully seated. Ensure the load is applied only in the pivot plane, as this is a pivot-only ring. Always verify the working load limit (3.9 kN) and side-load limit (1.5 kN) before use.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO quick-release threaded pivot-only hoist rings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
