Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Wing Nuts; Wing Knobs: Wing, Stainless Steel, M6 Thread, 12 mm Thread Lg - Corrosion-Resistant Wing Knobs with Threaded Hole
JW WINCOCorrosion-Resistant Wing Knobs with Threaded Hole

JW WINCO Wing Nuts; Wing Knobs: Wing, Stainless Steel, M6 Thread, 12 mm Thread Lg

JW WINCO Wing Nuts adalah mur kupu-kupu tahan korosi dengan lubang berulir yang dirancang untuk aplikasi industri yang membutuhkan pengencangan manual tanpa alat. Produk ini memiliki diameter 46 mm, panjang ulir 12…

SKU 3G-OTH-515102

Juga terdaftar sebagai: 83446M6EMT · 834 46 M6 E MT

Merek
JW WINCO
Item
Wing Nuts; Wing Knobs: Wing, Stainless Steel, M6 Thread, 12 mm Thread Lg
Kategori
Corrosion-Resistant Wing Knobs with Threaded Hole
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
834-46-M6-E-MT
Type
Stainless Steel, M6 Thread
Dia
46 mm
Thread Lg
12 mm
Wing Knobs
Wing

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Wing Nuts adalah mur kupu-kupu tahan korosi dengan lubang berulir yang dirancang untuk aplikasi industri yang membutuhkan pengencangan manual tanpa alat. Produk ini memiliki diameter 46 mm, panjang ulir 12 mm, dan tersedia dalam tipe Stainless Steel dengan ulir M6. Cocok digunakan sebagai komponen pengikat pada peralatan pembakaran, rangkaian gas, atau sistem mekanis lainnya yang memerlukan ketahanan terhadap korosi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Wing Nuts?

JW WINCO Wing Nuts memiliki diameter 46 mm, panjang ulir 12 mm, dan tipe Stainless Steel dengan ulir M6. Nomor komponen pabrikan adalah 834-46-M6-E-MT. Produk ini dirancang sebagai mur kupu-kupu tahan korosi dengan lubang berulir untuk pengencangan manual.

Untuk apa JW WINCO Wing Nuts digunakan?

JW WINCO Wing Nuts digunakan sebagai mur kupu-kupu tahan korosi untuk pengencangan manual pada peralatan industri, seperti komponen pada pembakar industri, katup gas, atau sistem mekanis yang memerlukan ketahanan terhadap korosi. Ulir M6 memudahkan pemasangan pada baut atau stud yang sesuai.

Di mana beli JW WINCO Wing Nuts di Indonesia?

Anda dapat membeli JW WINCO Wing Nuts melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda. Hubungi kami untuk minta penawaran.

Bagaimana cara memilih JW WINCO Wing Nuts yang tepat?

Pilih JW WINCO Wing Nuts berdasarkan diameter 46 mm, panjang ulir 12 mm, dan tipe ulir M6 yang sesuai dengan kebutuhan aplikasi Anda. Pastikan material Stainless Steel cocok untuk lingkungan yang memerlukan ketahanan korosi. Periksa juga kompatibilitas dengan baut atau stud yang digunakan.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.
Not sure this is the right part? Photo-identify it→

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant wing knobs with threaded hole. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This wing knob features a stainless steel M6 threaded hole with 8 mm thread length and 26 mm diameter. Designed for manual tightening in applications requiring corrosion resistance, it is suitable for use on machinery, fixtures, and equipment where frequent hand adjustment is needed
JW WINCO
This wing knob features a stainless steel M6 threaded hole with 8 mm thread length and 26 mm diameter. Designed for manual tightening in applications requiring corrosion resistance, it is suitable for use on machinery, fixtures, and equipment where frequent hand adjustment is needed
Corrosion-resistant wing knob with a threaded hole, made of stainless steel. Features a 1/4"-20 thread and 0.28-inch thread length. Used for manual fastening in applications requiring frequent adjustment or removal, such as machinery guards and panels
JW WINCO
Corrosion-resistant wing knob with a threaded hole, made of stainless steel. Features a 1/4"-20 thread and 0.28-inch thread length. Used for manual fastening in applications requiring frequent adjustment or removal, such as machinery guards and panels
This corrosion-resistant wing knob is made of stainless steel with a 1/4"-20 threaded hole and a 0.31 in thread length. Designed for manual tightening and loosening in applications requiring frequent adjustment, such as industrial equipment, machinery guards, and fixtures
JW WINCO
This corrosion-resistant wing knob is made of stainless steel with a 1/4"-20 threaded hole and a 0.31 in thread length. Designed for manual tightening and loosening in applications requiring frequent adjustment, such as industrial equipment, machinery guards, and fixtures
Stainless steel wing knob with a threaded hole, featuring a 34 mm diameter, M8 thread, and 9 mm thread length. Designed for manual adjustment and fastening in applications requiring corrosion resistance and frequent hand-tightening
JW WINCO
Stainless steel wing knob with a threaded hole, featuring a 34 mm diameter, M8 thread, and 9 mm thread length. Designed for manual adjustment and fastening in applications requiring corrosion resistance and frequent hand-tightening
This stainless steel wing knob features a 3/8"-16 threaded hole with a 0.39-inch thread length. Designed for manual tightening, it allows quick assembly and disassembly without tools. Suitable for applications requiring corrosion resistance, such as industrial equipment, machinery guards, and adjustable fixtures
JW WINCO
This stainless steel wing knob features a 3/8"-16 threaded hole with a 0.39-inch thread length. Designed for manual tightening, it allows quick assembly and disassembly without tools. Suitable for applications requiring corrosion resistance, such as industrial equipment, machinery guards, and adjustable fixtures
This stainless steel wing knob features an M6 threaded hole with a 7 mm thread length and 25 mm diameter. Designed for manual tightening and adjustment without tools, it is suited for applications requiring frequent repositioning or clamping in corrosive environments
JW WINCO
This stainless steel wing knob features an M6 threaded hole with a 7 mm thread length and 25 mm diameter. Designed for manual tightening and adjustment without tools, it is suited for applications requiring frequent repositioning or clamping in corrosive environments
This wing knob is made of stainless steel for corrosion resistance. It features a 5/16"-18 threaded hole and a thread length of 0.59 inches. Designed for manual fastening in applications requiring frequent adjustment or removal, such as industrial machinery and panel enclosures
JW WINCO
This wing knob is made of stainless steel for corrosion resistance. It features a 5/16"-18 threaded hole and a thread length of 0.59 inches. Designed for manual fastening in applications requiring frequent adjustment or removal, such as industrial machinery and panel enclosures
Corrosion-resistant wing knob with threaded hole, made of stainless steel. Features a 5/16"-18 thread and 0.35 in thread length. Designed for manual fastening in applications requiring frequent adjustment or removal, such as industrial machinery and panel enclosures
JW WINCO
Corrosion-resistant wing knob with threaded hole, made of stainless steel. Features a 5/16"-18 thread and 0.35 in thread length. Designed for manual fastening in applications requiring frequent adjustment or removal, such as industrial machinery and panel enclosures