Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Pressure-Relief Breather Vent - Pressure-Relief Breather Vents
JW WINCOPressure-Relief Breather Vents

JW WINCO Pressure-Relief Breather Vent

Katup pernapasan (breather valve) JW WINCO tipe 883-G3/8-160-A-MS adalah katup pelepas tekanan (pressure-relief breather vent) berdesain rendah tanpa tutup, dengan bukaan minimal 160 mbar. Terbuat dari bahan kuningan…

SKU 3G-OTH-591707

Juga terdaftar sebagai: 883G38160AMS · 883 G3 8 160 A MS · 883-G3-8-160-A-MS

Merek
JW WINCO
Item
Pressure-Relief Breather Vent
Kategori
Pressure-Relief Breather Vents
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
883-G3/8-160-A-MS
Type
SAE, Low Design w/o Breather Cap Design, 160 mbar Min. Opening, Brass
Thread Size
3/8"
Thread Type
SAE
Body Material
Brass
Opening Pressure - Minimum
160 mbar

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Katup pernapasan (breather valve) JW WINCO tipe 883-G3/8-160-A-MS adalah katup pelepas tekanan (pressure-relief breather vent) berdesain rendah tanpa tutup, dengan bukaan minimal 160 mbar. Terbuat dari bahan kuningan (brass) dengan ulir SAE 3/8", komponen ini dirancang untuk melindungi peralatan industri dari tekanan berlebih. Sebagai distributor resmi, 3G Electric menyediakan katup pernapasan JW WINCO ini untuk kebutuhan peralatan pembakaran dan sistem hidrolik di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa JW WINCO Breather Valve 3/8" digunakan?

Katup pernapasan JW WINCO tipe 883-G3/8-160-A-MS berfungsi sebagai katup pelepas tekanan (pressure-relief breather vent) untuk melindungi peralatan industri, seperti tangki atau sistem hidrolik, dari tekanan berlebih. Dengan bukaan minimal 160 mbar, katup ini memastikan tekanan dalam sistem tetap aman.

Apa spesifikasi JW WINCO Breather Valve 3/8"?

Spesifikasi katup pernapasan JW WINCO ini meliputi: tipe SAE low design tanpa tutup, ukuran ulir 3/8" SAE, bahan body kuningan (brass), tekanan bukaan minimal 160 mbar, dan nomor part 883-G3/8-160-A-MS.

Di mana beli JW WINCO Breather Valve 3/8" di Indonesia?

Anda dapat membeli katup pernapasan JW WINCO 883-G3/8-160-A-MS melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih JW WINCO Breather Valve yang tepat?

Pilih katup pernapasan JW WINCO berdasarkan ukuran ulir dan tekanan bukaan yang sesuai dengan sistem Anda. Untuk tipe 883-G3/8-160-A-MS, pastikan ulir SAE 3/8" dan tekanan bukaan minimal 160 mbar cocok dengan kebutuhan tekanan operasional peralatan Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO pressure-relief breather vents. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
Metric pressure-relief breather vent with M10 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used to relieve pressure buildup in industrial enclosures, gearboxes, or hydraulic tanks, protecting seals and components from overpressure
JW WINCO
Metric pressure-relief breather vent with M10 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used to relieve pressure buildup in industrial enclosures, gearboxes, or hydraulic tanks, protecting seals and components from overpressure
Metric pressure-relief breather vent with M10 thread and brass body. Low design without breather cap, minimum opening pressure 160 mbar. Used for controlled venting in sealed enclosures such as hydraulic systems, gearboxes, and fluid reservoirs
JW WINCO
Metric pressure-relief breather vent with M10 thread and brass body. Low design without breather cap, minimum opening pressure 160 mbar. Used for controlled venting in sealed enclosures such as hydraulic systems, gearboxes, and fluid reservoirs
This pressure-relief breather vent features a low-profile design without a breather cap, with a minimum opening pressure of 20 mbar. It has an M12 metric thread and a brass body. Typical applications include venting of enclosures, gearboxes, and hydraulic systems to prevent pressure buildup while blocking contaminants
JW WINCO
This pressure-relief breather vent features a low-profile design without a breather cap, with a minimum opening pressure of 20 mbar. It has an M12 metric thread and a brass body. Typical applications include venting of enclosures, gearboxes, and hydraulic systems to prevent pressure buildup while blocking contaminants
Metric pressure-relief breather vent with M14 x 1.5 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used on gearboxes, hydraulic tanks, and fluid-power systems to relieve pressure buildup while preventing contaminant ingress
JW WINCO
Metric pressure-relief breather vent with M14 x 1.5 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used on gearboxes, hydraulic tanks, and fluid-power systems to relieve pressure buildup while preventing contaminant ingress
Metric pressure-relief breather vent with green ring design, featuring an M20 thread size and brass body. Overall height 33 mm. Used for controlled venting in industrial equipment enclosures such as gearboxes, hydraulic tanks, and pumps to relieve excess pressure and prevent seal damage
JW WINCO
Metric pressure-relief breather vent with green ring design, featuring an M20 thread size and brass body. Overall height 33 mm. Used for controlled venting in industrial equipment enclosures such as gearboxes, hydraulic tanks, and pumps to relieve excess pressure and prevent seal damage
This pressure-relief breather vent features a brass body with a green ring design for pressure relief. It has a 3/4" SAE thread and an overall height of 1 1/4 in. Used on hydraulic reservoirs, gearboxes, and fluid systems to relieve pressure while preventing contamination
JW WINCO
This pressure-relief breather vent features a brass body with a green ring design for pressure relief. It has a 3/4" SAE thread and an overall height of 1 1/4 in. Used on hydraulic reservoirs, gearboxes, and fluid systems to relieve pressure while preventing contamination
This pressure-relief breather vent from JW WINCO features a brass body with 1/4" SAE threads and a low design without a breather cap. It has a minimum opening pressure of 160 mbar, making it suitable for venting excess pressure in hydraulic and pneumatic systems to prevent seal damage and component failure
JW WINCO
This pressure-relief breather vent from JW WINCO features a brass body with 1/4" SAE threads and a low design without a breather cap. It has a minimum opening pressure of 160 mbar, making it suitable for venting excess pressure in hydraulic and pneumatic systems to prevent seal damage and component failure
SAE high-design pressure-relief breather vent with stainless steel cap and brass body. Minimum opening pressure of 20 mbar. Used to relieve pressure buildup in sealed enclosures, gearboxes, and fluid systems, protecting seals and components
JW WINCO
SAE high-design pressure-relief breather vent with stainless steel cap and brass body. Minimum opening pressure of 20 mbar. Used to relieve pressure buildup in sealed enclosures, gearboxes, and fluid systems, protecting seals and components