Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Katup Pernapasan: M12, Metrik, Desain Tinggi dengan Desain Tutup Pernapasan Baja Tahan Karat - Pressure-Relief Breather Vents
JW WINCOPressure-Relief Breather Vents

JW WINCO Katup Pernapasan: M12, Metrik, Desain Tinggi dengan Desain Tutup Pernapasan Baja Tahan Karat

JW WINCO Breather Valve M12 adalah katup pelepas tekanan (pressure-relief breather vent) berdesain metrik dengan tutup baja tahan karat dan bodi kuningan. Katup ini memiliki ukuran ulir M12, tipe ulir metrik, dan…

SKU 3G-OTH-591717

Juga terdaftar sebagai: 883M12X1520BMS · 883 M12X1 5 20 B MS · 883-M12X1-5-20-B-MS

Merek
JW WINCO
Item
Katup Pernapasan: M12, Metrik, Desain Tinggi dengan Desain Tutup Pernapasan Baja Tahan Karat
Kategori
Pressure-Relief Breather Vents
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
883-M12X1.5-20-B-MS
Type
Metric, High Design with Stainless Steel Breather Cap Design, Brass
Thread Size
M12
Thread Type
Metric
Body Material
Brass
Opening Pressure - Minimum
20 mbar

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Breather Valve M12 adalah katup pelepas tekanan (pressure-relief breather vent) berdesain metrik dengan tutup baja tahan karat dan bodi kuningan. Katup ini memiliki ukuran ulir M12, tipe ulir metrik, dan tekanan bukaan minimum 20 mbar. Produk dengan nomor bagian 883-M12X1.5-20-B-MS ini dirancang untuk aplikasi ventilasi tekanan pada peralatan industri, termasuk sistem pembakaran dan ketel uap.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi JW WINCO Breather Valve M12?

JW WINCO Breather Valve M12 berfungsi sebagai katup pelepas tekanan (pressure-relief breather vent) untuk mengatur tekanan berlebih dalam sistem peralatan industri. Katup ini membantu menjaga tekanan operasi tetap aman dengan membuka pada tekanan bukaan minimum 20 mbar.

Apa spesifikasi teknis JW WINCO Breather Valve M12?

Spesifikasi teknis JW WINCO Breather Valve M12 meliputi: ukuran ulir M12, tipe ulir metrik, bodi kuningan (brass), tutup baja tahan karat (stainless steel breather cap), tekanan bukaan minimum 20 mbar, dan nomor bagian 883-M12X1.5-20-B-MS.

Di mana beli JW WINCO Breather Valve M12 di Indonesia?

Anda dapat membeli JW WINCO Breather Valve M12 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Bagaimana cara memilih JW WINCO Breather Valve yang tepat?

Untuk memilih JW WINCO Breather Valve yang tepat, perhatikan ukuran ulir (M12), tipe ulir metrik, tekanan bukaan minimum (20 mbar), dan material bodi (kuningan). Pastikan spesifikasi ini sesuai dengan kebutuhan sistem tekanan Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO pressure-relief breather vents. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Metric pressure-relief breather vent with M16 thread, brass body, and stainless steel cap. Minimum opening pressure 160 mbar. Used on gearboxes, hydraulic tanks, and industrial enclosures to relieve excess pressure and prevent contamination
JW WINCO
Metric pressure-relief breather vent with M16 thread, brass body, and stainless steel cap. Minimum opening pressure 160 mbar. Used on gearboxes, hydraulic tanks, and industrial enclosures to relieve excess pressure and prevent contamination
Steel pneumatic breather vent with 1-1/4 in NPT connection. Features 40 micron filtration and 150 psi maximum operating pressure. Used on pneumatic equipment to filter incoming air and relieve internal pressure, preventing contaminants from entering reservoirs, cylinders, or valves
ARROW PNEUMATICS
Steel pneumatic breather vent with 1-1/4 in NPT connection. Features 40 micron filtration and 150 psi maximum operating pressure. Used on pneumatic equipment to filter incoming air and relieve internal pressure, preventing contaminants from entering reservoirs, cylinders, or valves
This bronze drum vent provides pressure and vacuum relief for drums containing flammable and non-flammable liquids. It features a 2 in Male NPT connection and opens at a minimum of 5 psi to prevent drum rupture or collapse during storage, transport, or dispensing
This bronze drum vent provides pressure and vacuum relief for drums containing flammable and non-flammable liquids. It features a 2 in Male NPT connection and opens at a minimum of 5 psi to prevent drum rupture or collapse during storage, transport, or dispensing
Bronze pressure and vacuum relief vent with 2 in Male NPT connection. Opens at a minimum of 5 psi to relieve excess pressure. Designed for horizontal installation on drums containing flammable or non-flammable liquids, helping to prevent rupture or collapse during storage, transport, or dispensing
Bronze pressure and vacuum relief vent with 2 in Male NPT connection. Opens at a minimum of 5 psi to relieve excess pressure. Designed for horizontal installation on drums containing flammable or non-flammable liquids, helping to prevent rupture or collapse during storage, transport, or dispensing
This pneumatic breather vent filters incoming air to 40 micron while equalizing pressure in reservoirs and gearboxes. Constructed from bronze with a 1/4 in BSP connection, it handles maximum operating pressure of 150 psi and maximum operating temperature of 300°F
ARROW PNEUMATICS
This pneumatic breather vent filters incoming air to 40 micron while equalizing pressure in reservoirs and gearboxes. Constructed from bronze with a 1/4 in BSP connection, it handles maximum operating pressure of 150 psi and maximum operating temperature of 300°F
This pneumatic breather vent filters incoming air and relieves pressure in pneumatic systems such as cylinders, valves, and reservoirs. It features a 40 micron bronze element that prevents contaminants from entering while allowing airflow. Rated for a maximum operating pressure of 150 psi and a maximum operating temperature of 300°F
ARROW PNEUMATICS
This pneumatic breather vent filters incoming air and relieves pressure in pneumatic systems such as cylinders, valves, and reservoirs. It features a 40 micron bronze element that prevents contaminants from entering while allowing airflow. Rated for a maximum operating pressure of 150 psi and a maximum operating temperature of 300°F

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
Metric pressure-relief breather vent with M10 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used to relieve pressure buildup in industrial enclosures, gearboxes, or hydraulic tanks, protecting seals and components from overpressure
JW WINCO
Metric pressure-relief breather vent with M10 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used to relieve pressure buildup in industrial enclosures, gearboxes, or hydraulic tanks, protecting seals and components from overpressure
Metric pressure-relief breather vent with M10 thread and brass body. Low design without breather cap, minimum opening pressure 160 mbar. Used for controlled venting in sealed enclosures such as hydraulic systems, gearboxes, and fluid reservoirs
JW WINCO
Metric pressure-relief breather vent with M10 thread and brass body. Low design without breather cap, minimum opening pressure 160 mbar. Used for controlled venting in sealed enclosures such as hydraulic systems, gearboxes, and fluid reservoirs
This pressure-relief breather vent features a low-profile design without a breather cap, with a minimum opening pressure of 20 mbar. It has an M12 metric thread and a brass body. Typical applications include venting of enclosures, gearboxes, and hydraulic systems to prevent pressure buildup while blocking contaminants
JW WINCO
This pressure-relief breather vent features a low-profile design without a breather cap, with a minimum opening pressure of 20 mbar. It has an M12 metric thread and a brass body. Typical applications include venting of enclosures, gearboxes, and hydraulic systems to prevent pressure buildup while blocking contaminants
Metric pressure-relief breather vent with M14 x 1.5 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used on gearboxes, hydraulic tanks, and fluid-power systems to relieve pressure buildup while preventing contaminant ingress
JW WINCO
Metric pressure-relief breather vent with M14 x 1.5 thread, brass body, and stainless steel cap. Minimum opening pressure of 160 mbar. Used on gearboxes, hydraulic tanks, and fluid-power systems to relieve pressure buildup while preventing contaminant ingress
Metric pressure-relief breather vent with green ring design, featuring an M20 thread size and brass body. Overall height 33 mm. Used for controlled venting in industrial equipment enclosures such as gearboxes, hydraulic tanks, and pumps to relieve excess pressure and prevent seal damage
JW WINCO
Metric pressure-relief breather vent with green ring design, featuring an M20 thread size and brass body. Overall height 33 mm. Used for controlled venting in industrial equipment enclosures such as gearboxes, hydraulic tanks, and pumps to relieve excess pressure and prevent seal damage
This pressure-relief breather vent features a brass body with a green ring design for pressure relief. It has a 3/4" SAE thread and an overall height of 1 1/4 in. Used on hydraulic reservoirs, gearboxes, and fluid systems to relieve pressure while preventing contamination
JW WINCO
This pressure-relief breather vent features a brass body with a green ring design for pressure relief. It has a 3/4" SAE thread and an overall height of 1 1/4 in. Used on hydraulic reservoirs, gearboxes, and fluid systems to relieve pressure while preventing contamination
This pressure-relief breather vent from JW WINCO features a brass body with 1/4" SAE threads and a low design without a breather cap. It has a minimum opening pressure of 160 mbar, making it suitable for venting excess pressure in hydraulic and pneumatic systems to prevent seal damage and component failure
JW WINCO
This pressure-relief breather vent from JW WINCO features a brass body with 1/4" SAE threads and a low design without a breather cap. It has a minimum opening pressure of 160 mbar, making it suitable for venting excess pressure in hydraulic and pneumatic systems to prevent seal damage and component failure
SAE high-design pressure-relief breather vent with stainless steel cap and brass body. Minimum opening pressure of 20 mbar. Used to relieve pressure buildup in sealed enclosures, gearboxes, and fluid systems, protecting seals and components
JW WINCO
SAE high-design pressure-relief breather vent with stainless steel cap and brass body. Minimum opening pressure of 20 mbar. Used to relieve pressure buildup in sealed enclosures, gearboxes, and fluid systems, protecting seals and components