JW WINCO Breather Valve: M16, Metric, High Design with Stainless Steel Breather Cap Design
The JW WINCO Breather Valve (MPN 883-M16X1.5-160-B-MS) is a metric, high-design pressure-relief breather vent with a stainless steel cap and brass body. It features an M16 metric thread and a minimum opening pressure…
SKU 3G-OTH-591726
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Breather Valve (MPN 883-M16X1.5-160-B-MS) is a metric, high-design pressure-relief breather vent with a stainless steel cap and brass body. It features an M16 metric thread and a minimum opening pressure of 160 mbar.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JW WINCO breather valve used for?
A JW WINCO breather valve, like the 883-M16X1.5-160-B-MS, is used to relieve excess pressure in industrial enclosures, gearboxes, or hydraulic tanks. Its stainless steel cap and brass body resist corrosion, while the 160 mbar opening pressure protects seals and prevents contamination in demanding environments.
What are the specifications of the JW WINCO 883-M16X1.5-160-B-MS?
The JW WINCO 883-M16X1.5-160-B-MS is a metric, high-design pressure-relief breather vent with an M16 thread size and metric thread type. It has a brass body, stainless steel cap, and a minimum opening pressure of 160 mbar. The part number is 883-M16X1.5-160-B-MS.
Where to buy JW WINCO breather valves worldwide?
3G Electric supplies JW WINCO breather valves, including the 883-M16X1.5-160-B-MS, to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this metric pressure-relief vent with a 160 mbar opening pressure.
How to install a JW WINCO breather valve?
To install a JW WINCO breather valve, clean the mounting port and apply thread sealant to the M16 metric threads. Hand-tighten the brass body into the enclosure, then torque to manufacturer specifications. Ensure the stainless steel cap is unobstructed for proper pressure relief at 160 mbar.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO pressure-relief breather vents. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
