JW WINCO Breather Filter: 10 micron Filter, Brass, M14, Metric
The JW WINCO Breather Filter is a 10 micron filter breather vent with a brass body and M14 metric thread. It features an Air Exchange (Blue Ring) design and is identified by manufacturer part number 882-M14X1.5-MS-M.
SKU 3G-OTH-591688
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The JW WINCO Breather Filter is a 10 micron filter breather vent with a brass body and M14 metric thread. It features an Air Exchange (Blue Ring) design and is identified by manufacturer part number 882-M14X1.5-MS-M.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a JW WINCO Breather Filter used for?
A JW WINCO Breather Filter is used to vent air into or out of industrial equipment enclosures while filtering airborne particles down to 10 micron. It prevents contamination in gearboxes, hydraulic tanks, and pumps, extending component life in machining, power transmission, and material handling systems.
What are the specifications of the JW WINCO Breather Filter 882-M14X1.5-MS-M?
The JW WINCO Breather Filter has a 10 micron filtration rating, a brass body, and an M14 metric thread (M14x1.5). It features an Air Exchange (Blue Ring) design. The manufacturer part number is 882-M14X1.5-MS-M. 3G Electric supplies this filter for global industrial applications.
Where to buy a JW WINCO Breather Filter worldwide?
3G Electric supplies the JW WINCO Breather Filter 882-M14X1.5-MS-M to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this 10 micron brass breather filter with M14 metric thread.
How to install a JW WINCO Breather Filter?
Install the JW WINCO Breather Filter by threading the M14x1.5 brass body into a compatible port on your equipment. Tighten by hand or with a wrench on the hex flats — do not overtighten. Ensure the blue ring seal is seated properly to prevent leaks. Replace when clogged or at scheduled maintenance intervals.
Digunakan dalam
Aplikasi umum untuk JW WINCOJW WINCO Produk
3G Electric memasok JW WINCO filter breather vents. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









