Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Sekrup Penyetel dengan Ujung Kuningan: Baja Tahan Karat, Ujung Kuningan, Ukuran Ulir M12 - Non-Marring Half Dog Point Set Screws
JW WINCONon-Marring Half Dog Point Set Screws

JW WINCO Sekrup Penyetel dengan Ujung Kuningan: Baja Tahan Karat, Ujung Kuningan, Ukuran Ulir M12

JW WINCO Set Screw with Brass Tip adalah baut setel tipe Non-Marring Half Dog Point yang dirancang untuk aplikasi industri yang memerlukan pengikatan tanpa meninggalkan bekas pada permukaan komponen. Terbuat dari…

SKU 3G-OTH-525074

Juga terdaftar sebagai: 9135M1240MS · 913 5 M12 40 MS · 913-5-M12-40-MS

Merek
JW WINCO
Item
Sekrup Penyetel dengan Ujung Kuningan: Baja Tahan Karat, Ujung Kuningan, Ukuran Ulir M12
Kategori
Non-Marring Half Dog Point Set Screws
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
913.5-M12-40-MS
Type
Brass Tip, M12 Thread Size
Pack Size
Small Pack
Fastener Lg
40 mm
System of Measurement
Metric
BROAD Material Grade/Class
18-8

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Set Screw with Brass Tip adalah baut setel tipe Non-Marring Half Dog Point yang dirancang untuk aplikasi industri yang memerlukan pengikatan tanpa meninggalkan bekas pada permukaan komponen. Terbuat dari baja tahan karat 18-8 dengan ujung kuningan, produk ini memiliki ukuran ulir M12, panjang 40 mm, dan dikemas dalam Small Pack. Cocok digunakan sebagai suku cadang pembakar atau peralatan industri yang memerlukan presisi tinggi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi JW WINCO Set Screw with Brass Tip?

JW WINCO Set Screw with Brass Tip berfungsi sebagai baut setel non-marring yang mengencangkan komponen tanpa merusak permukaan. Ujung kuningan (brass tip) mencegah goresan, ideal untuk aplikasi pada peralatan pembakaran atau mesin presisi.

Apa spesifikasi JW WINCO Set Screw with Brass Tip 913.5-M12-40-MS?

Spesifikasi produk ini meliputi tipe ulir M12, panjang 40 mm, material baja tahan karat 18-8 dengan ujung kuningan, dan dikemas dalam Small Pack. Nomor part pabrikan adalah 913.5-M12-40-MS.

Di mana beli JW WINCO Set Screw with Brass Tip di Indonesia?

Anda dapat membeli JW WINCO Set Screw with Brass Tip melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu.

Bagaimana cara memilih JW WINCO Set Screw yang tepat?

Pilih berdasarkan ukuran ulir (M12), panjang (40 mm), dan material. Untuk aplikasi non-marring, pastikan menggunakan tipe brass tip seperti JW WINCO 913.5-M12-40-MS. Sesuaikan dengan kebutuhan pengikatan pada peralatan industri Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO non-marring half dog point set screws. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Steel set screw with black oxide finish and brass tip, featuring M12 thread and 40 mm length. The half dog point design and non-marring brass tip allow secure clamping without damaging mating surfaces, suitable for precision alignment in machinery, conveyors, and fixturing
JW WINCO
Steel set screw with black oxide finish and brass tip, featuring M12 thread and 40 mm length. The half dog point design and non-marring brass tip allow secure clamping without damaging mating surfaces, suitable for precision alignment in machinery, conveyors, and fixturing
This set screw features a black oxide finished steel body with a brass tip, providing non-marring half dog point performance. The brass tip prevents damage to mating surfaces, making it suitable for securing components in machinery, conveyors, and automation systems. Thread size M5, length 8 mm, metric measurement
JW WINCO
This set screw features a black oxide finished steel body with a brass tip, providing non-marring half dog point performance. The brass tip prevents damage to mating surfaces, making it suitable for securing components in machinery, conveyors, and automation systems. Thread size M5, length 8 mm, metric measurement
This set screw features a steel body with black oxide finish and a POM plastic tip. The half dog point design allows secure fastening without marring surfaces. Typical applications include securing components in machinery and automation where surface protection is required
JW WINCO
This set screw features a steel body with black oxide finish and a POM plastic tip. The half dog point design allows secure fastening without marring surfaces. Typical applications include securing components in machinery and automation where surface protection is required
Steel set screw with black oxide finish and a non-marring half dog point made of plastic (Nylon 66). Thread size 3/8"-16, inch system. Used to secure components on shafts or in bores without damaging mating surfaces, suitable for applications where surface finish preservation is required
JW WINCO
Steel set screw with black oxide finish and a non-marring half dog point made of plastic (Nylon 66). Thread size 3/8"-16, inch system. Used to secure components on shafts or in bores without damaging mating surfaces, suitable for applications where surface finish preservation is required
Carbon steel bearing locknut with black oxide finish and M40x1.50 bore thread. Uses M8 set screws for positive locking. Secures bearings onto shafts in industrial machinery such as conveyors, pumps, gearboxes, and rotating equipment, preventing loosening under vibration and axial loads
JW WINCO
Carbon steel bearing locknut with black oxide finish and M40x1.50 bore thread. Uses M8 set screws for positive locking. Secures bearings onto shafts in industrial machinery such as conveyors, pumps, gearboxes, and rotating equipment, preventing loosening under vibration and axial loads
Carbon steel bearing locknut with black oxide finish and M12x1.50 bore thread. Uses M4 set screws to secure bearings onto shafts, preventing loosening under vibration. Suitable for applications such as conveyors, pumps, and gearboxes in power transmission and material handling equipment
JW WINCO
Carbon steel bearing locknut with black oxide finish and M12x1.50 bore thread. Uses M4 set screws to secure bearings onto shafts, preventing loosening under vibration. Suitable for applications such as conveyors, pumps, and gearboxes in power transmission and material handling equipment

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This set screw features a POM (polyoxymethylene) tip that prevents marring of mating surfaces. Made from 18-8 stainless steel with metric M10 thread and 25 mm length. Suitable for securing components in industrial machinery, automation, and fixturing where surface protection is required
JW WINCO
This set screw features a POM (polyoxymethylene) tip that prevents marring of mating surfaces. Made from 18-8 stainless steel with metric M10 thread and 25 mm length. Suitable for securing components in industrial machinery, automation, and fixturing where surface protection is required
Metric set screw with a half dog point and a POM plastic tip to prevent marring of mating surfaces. Made of black oxide finished steel, M5 thread size, 10 mm length. Suitable for applications where surface finish must be preserved, such as in precision assemblies or fixtures
JW WINCO
Metric set screw with a half dog point and a POM plastic tip to prevent marring of mating surfaces. Made of black oxide finished steel, M5 thread size, 10 mm length. Suitable for applications where surface finish must be preserved, such as in precision assemblies or fixtures
This set screw features an 18-8 stainless steel body with a brass tip that prevents marring on mating surfaces. The half dog point design provides secure positioning in applications such as industrial machinery, conveyors, and automation systems where surface integrity is critical. Metric M10 thread, 40 mm length
JW WINCO
This set screw features an 18-8 stainless steel body with a brass tip that prevents marring on mating surfaces. The half dog point design provides secure positioning in applications such as industrial machinery, conveyors, and automation systems where surface integrity is critical. Metric M10 thread, 40 mm length
This set screw features a black oxide finished steel body with a brass tip to prevent marring of mating surfaces. The half dog point design provides secure positioning in applications such as machine assembly and power transmission. Thread size is 3/8"-16, with a socket drive. Supplied in a small pack
JW WINCO
This set screw features a black oxide finished steel body with a brass tip to prevent marring of mating surfaces. The half dog point design provides secure positioning in applications such as machine assembly and power transmission. Thread size is 3/8"-16, with a socket drive. Supplied in a small pack
This set screw features a black oxide finished steel body with a POM (polyoxymethylene) plastic tip, providing non-marring clamping. The half dog point design secures components without damaging mating surfaces, suitable for applications where surface finish preservation is required. Metric M10 thread, 40 mm length, supplied in a small pack
JW WINCO
This set screw features a black oxide finished steel body with a POM (polyoxymethylene) plastic tip, providing non-marring clamping. The half dog point design secures components without damaging mating surfaces, suitable for applications where surface finish preservation is required. Metric M10 thread, 40 mm length, supplied in a small pack
This set screw features a steel body with black oxide finish and a brass tip, designed to secure components on shafts without marring surfaces. The 1/4"-20 thread size and socket drive allow for precise adjustment in positioning and holding applications
JW WINCO
This set screw features a steel body with black oxide finish and a brass tip, designed to secure components on shafts without marring surfaces. The 1/4"-20 thread size and socket drive allow for precise adjustment in positioning and holding applications
This set screw features a brass tip that prevents marring on mating surfaces, suitable for securing components in precision alignment and holding applications. Constructed from 18-8 stainless steel with a brass tip, it has an M6 thread size and 20 mm length. The half dog point design provides secure fastening without surface damage
JW WINCO
This set screw features a brass tip that prevents marring on mating surfaces, suitable for securing components in precision alignment and holding applications. Constructed from 18-8 stainless steel with a brass tip, it has an M6 thread size and 20 mm length. The half dog point design provides secure fastening without surface damage
Steel set screw with black oxide finish and brass tip, featuring a 1/2"-13 thread size and socket drive. The brass tip provides a non-marring half dog point, suitable for securing components without damaging surfaces in precision assembly applications
JW WINCO
Steel set screw with black oxide finish and brass tip, featuring a 1/2"-13 thread size and socket drive. The brass tip provides a non-marring half dog point, suitable for securing components without damaging surfaces in precision assembly applications