Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Griper Pemasangan Belakang KIPP dengan Permukaan Bergerigi: 12 mm Dia, M5, 10 mm Ht, Bergerigi - Rear-Mount Steel Grippers with Carbide-Tipped Serrated Face
KIPPRear-Mount Steel Grippers with Carbide-Tipped Serrated Face

Griper Pemasangan Belakang KIPP dengan Permukaan Bergerigi: 12 mm Dia, M5, 10 mm Ht, Bergerigi

KIPP Rear-Mount Gripper dengan serrated face berdiameter 12 mm adalah komponen pencekam industri yang dirancang untuk aplikasi pemegangan presisi. Dilengkapi dengan ujung karbida bergerigi (carbide-tipped serrated…

SKU 3G-OTH-180125

Juga terdaftar sebagai: K038512107 · K0385 12107 · K0385-12107

Merek
KIPP
Item
Griper Pemasangan Belakang KIPP dengan Permukaan Bergerigi: 12 mm Dia, M5, 10 mm Ht, Bergerigi
Kategori
Rear-Mount Steel Grippers with Carbide-Tipped Serrated Face
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

KIPP
Manufacturer Part Number
K0385.12107
Type
M5, Serrated, Carbide
Ht
10 mm

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

KIPP Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

KIPP Rear-Mount Gripper dengan serrated face berdiameter 12 mm adalah komponen pencekam industri yang dirancang untuk aplikasi pemegangan presisi. Dilengkapi dengan ujung karbida bergerigi (carbide-tipped serrated face) dan ulir M5, gripper ini memiliki tinggi 10 mm dan tersedia dalam nomor bagian K0385.12107. Produk ini ideal untuk sistem otomatisasi dan perlengkapan jig & fixture yang membutuhkan daya cengkeram kuat pada permukaan keras.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi KIPP Rear-Mount Gripper dengan serrated face?

KIPP Rear-Mount Gripper berfungsi sebagai elemen pencekam pada fixture atau jig untuk menahan benda kerja secara presisi. Dengan ujung karbida bergerigi (carbide-tipped serrated face), gripper ini memberikan cengkeraman kuat pada permukaan keras, cocok untuk aplikasi otomatisasi industri.

Apa spesifikasi teknis KIPP Rear-Mount Gripper K0385.12107?

Spesifikasi KIPP Rear-Mount Gripper K0385.12107 meliputi diameter 12 mm, tinggi 10 mm, tipe ulir M5 dengan ujung karbida bergerigi (serrated, carbide). Produk ini diproduksi oleh KIPP dengan nomor bagian K0385.12107.

Di mana beli KIPP Rear-Mount Gripper di Indonesia?

Anda dapat membeli KIPP Rear-Mount Gripper asli melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda menerima produk dengan nomor bagian K0385.12107 tepat sesuai spesifikasi.

Bagaimana cara memilih KIPP Rear-Mount Gripper yang tepat?

Pilih KIPP Rear-Mount Gripper berdasarkan diameter (12 mm), tinggi (10 mm), dan tipe ulir (M5). Pastikan ujung karbida bergerigi (carbide-tipped serrated face) sesuai dengan material benda kerja yang akan dicekam. Untuk aplikasi khusus, konsultasikan dengan teknisi 3G Electric.

Digunakan dalam

Aplikasi umum untuk KIPP
Jig and fixture construction — KIPP indexing plungers (e.g., SKU 53EC55) for repeatable workpiece positioning
Assembly line tooling — KIPP threaded grippers with flat pads (e.g., SKU 801Y95) for clamping components
Machine tool alignment — KIPP tapered-head locating pins (e.g., SKU 801XY4) for precise part registration
Sanitary processing equipment — KIPP hygienic sockets (e.g., SKU 802KU2) for tooling in food-grade environments
Abrasive material handling — KIPP diamond-faced inserts (e.g., SKU 801XH6) for gripping in dusty or gritty conditions
Fixture leveling and support — KIPP positioning feet with flat faces (e.g., SKU 615V08) for stable machine setup

KIPP Produk

3G Electric memasok KIPP rear-mount steel grippers with carbide-tipped serrated face. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This tapped gripper features a serrated carbide pad for high grip and wear resistance. With an M8 thread, 12 mm pad diameter, 19 mm outer diameter, and 39 kN maximum load capacity, it is suited for clamping and positioning workpieces in jigs, fixtures, and automation systems
KIPP
This tapped gripper features a serrated carbide pad for high grip and wear resistance. With an M8 thread, 12 mm pad diameter, 19 mm outer diameter, and 39 kN maximum load capacity, it is suited for clamping and positioning workpieces in jigs, fixtures, and automation systems
Threaded gripper with a carbide-tipped steel pad featuring a serrated gripping surface. The M10 thread and 15 mm thread length allow installation into fixturing components. The 10 mm diameter pad provides a wear-resistant contact point for clamping or positioning workpieces in jigs and fixtures
KIPP
Threaded gripper with a carbide-tipped steel pad featuring a serrated gripping surface. The M10 thread and 15 mm thread length allow installation into fixturing components. The 10 mm diameter pad provides a wear-resistant contact point for clamping or positioning workpieces in jigs and fixtures
This tapped gripper features a serrated carbide-tipped pad for secure clamping and positioning of workpieces in machining and automation applications. With an M12 thread, 25 mm pad diameter, 36 mm outer diameter, and a maximum load capacity of 136 kN, it is suited for heavy-duty workholding in fixtures and robotic end-of-arm tooling
KIPP
This tapped gripper features a serrated carbide-tipped pad for secure clamping and positioning of workpieces in machining and automation applications. With an M12 thread, 25 mm pad diameter, 36 mm outer diameter, and a maximum load capacity of 136 kN, it is suited for heavy-duty workholding in fixtures and robotic end-of-arm tooling
This rear-mount square gripper pad features a carbide fine tooth pattern for secure workpiece gripping. With a 12 mm face width, M5 thread, and 10 mm overall height, it is suited for clamping and positioning in machining fixtures and workholding applications. The black oxide finish provides corrosion resistance
KIPP
This rear-mount square gripper pad features a carbide fine tooth pattern for secure workpiece gripping. With a 12 mm face width, M5 thread, and 10 mm overall height, it is suited for clamping and positioning in machining fixtures and workholding applications. The black oxide finish provides corrosion resistance
Threaded gripper with a serrated carbide-tipped steel pad for workholding in jigs and fixtures. The carbide pad provides wear resistance and grip on hard materials. Thread size M16, thread length 50 mm, pad diameter 16 mm
KIPP
Threaded gripper with a serrated carbide-tipped steel pad for workholding in jigs and fixtures. The carbide pad provides wear resistance and grip on hard materials. Thread size M16, thread length 50 mm, pad diameter 16 mm
This tapped gripper features a serrated carbide pad for high grip on hard materials. With M10 thread, 24 mm outer diameter, 16 mm pad diameter, and 58 kN maximum load capacity, it is used in workholding and clamping applications for machining, robotics, and assembly
KIPP
This tapped gripper features a serrated carbide pad for high grip on hard materials. With M10 thread, 24 mm outer diameter, 16 mm pad diameter, and 58 kN maximum load capacity, it is used in workholding and clamping applications for machining, robotics, and assembly

Lainnya dari KIPP

Lihat semua KIPP suku cadang →
This rear-mount steel gripper features a carbide-tipped serrated face for high grip and wear resistance. With a 16 mm diameter, M6 thread, and 10 mm height, it is used in industrial automation and workholding for clamping and positioning parts during machining, assembly, and material handling
KIPP
This rear-mount steel gripper features a carbide-tipped serrated face for high grip and wear resistance. With a 16 mm diameter, M6 thread, and 10 mm height, it is used in industrial automation and workholding for clamping and positioning parts during machining, assembly, and material handling
This rear-mount steel gripper features a carbide-tipped serrated face for secure workpiece clamping and positioning. With a 10 mm height and M5 thread, it is suited for industrial automation, workholding, and robotic end-of-arm tooling applications
KIPP
This rear-mount steel gripper features a carbide-tipped serrated face for secure workpiece clamping and positioning. With a 10 mm height and M5 thread, it is suited for industrial automation, workholding, and robotic end-of-arm tooling applications
Steel gripper with carbide-tipped serrated face for rear mounting. M6 thread, 10 mm height. Used in industrial automation for clamping or positioning workpieces in machining, assembly, and material handling applications
KIPP
Steel gripper with carbide-tipped serrated face for rear mounting. M6 thread, 10 mm height. Used in industrial automation for clamping or positioning workpieces in machining, assembly, and material handling applications
This rear-mount steel gripper features a carbide-tipped serrated face for high grip and wear resistance. With a height of 10 mm and M6 thread, it is used in clamping, positioning, or holding workpieces in industrial automation and machining applications
KIPP
This rear-mount steel gripper features a carbide-tipped serrated face for high grip and wear resistance. With a height of 10 mm and M6 thread, it is used in clamping, positioning, or holding workpieces in industrial automation and machining applications
Steel gripper with carbide-tipped serrated face for rear-mount installation. M5 thread, 12 mm height. Serrated carbide insert provides wear resistance and high holding force for clamping workpieces in machining and automation fixtures
KIPP
Steel gripper with carbide-tipped serrated face for rear-mount installation. M5 thread, 12 mm height. Serrated carbide insert provides wear resistance and high holding force for clamping workpieces in machining and automation fixtures