LEGRIS Push-Fit Elbow Fitting: 1/4 in OD x 1/4 in Pipe Size, Push-to-Connect x MNPT
The LEGRIS Push-Fit Elbow Fitting (MPN 3129 56 14) is a nylon and nickel-plated brass tube fitting in a Push-to-Connect x MNPT configuration, sized for 1/4 in OD tube and 1/4 in pipe. This black fitting is supplied…
SKU 3G-OTH-491972
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Push-Fit Elbow Fitting (MPN 3129 56 14) is a nylon and nickel-plated brass tube fitting in a Push-to-Connect x MNPT configuration, sized for 1/4 in OD tube and 1/4 in pipe. This black fitting is supplied in a 10-pack, enabling quick, secure connections in pneumatic or fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS Push-Fit Elbow Fitting used for?
The LEGRIS Push-Fit Elbow Fitting (3129 56 14) is used for quick, secure connections in pneumatic and fluid systems. It connects 1/4 in OD nylon or polyurethane tubing to 1/4 in male NPT ports, commonly found in industrial automation, packaging, and material handling equipment.
What are the specifications of the LEGRIS 3129 56 14 fitting?
The LEGRIS 3129 56 14 is a Push-to-Connect x MNPT elbow fitting. It accepts 1/4 in OD tube and has a 1/4 in male NPT thread. The body is made of nickel-plated brass with a nylon release collet, and it comes in a 10-pack. Operating pressure range is typically 0 to 10 bar for pneumatic use.
Where to buy LEGRIS push-fit fittings in worldwide?
3G Electric supplies LEGRIS push-fit fittings worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the LEGRIS 3129 56 14 10-pack or other tube fitting configurations.
How to install a LEGRIS push-to-connect elbow fitting?
To install the LEGRIS push-to-connect elbow, cut the tube square, push it fully into the fitting until it stops, then pull back slightly to lock. For the male NPT end, apply thread sealant and tighten to 1-2 turns past hand-tight. Ensure the system is depressurized before installation.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








