LEGRIS Push-Fit Elbow Fitting: 10 mm OD x 1/4 in Pipe Size, Push-to-Connect x MBSPP
The LEGRIS Push-Fit Elbow Fitting (MPN 3199 10 13) is a nylon and nickel-plated brass tube fitting in a push-to-connect x MBSPP configuration, sized for 10 mm OD tube and 1/4 in pipe. This black fitting is sold in a…
SKU 3G-OTH-492122
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Push-Fit Elbow Fitting (MPN 3199 10 13) is a nylon and nickel-plated brass tube fitting in a push-to-connect x MBSPP configuration, sized for 10 mm OD tube and 1/4 in pipe. This black fitting is sold in a 10-pack. 3G Electric interprets your demand for pneumatic and fluid-handling components across 14 industrial departments, with specialist depth in pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS Push-Fit Elbow Fitting used for?
A LEGRIS Push-Fit Elbow Fitting connects 10 mm OD tubing to a 1/4 in male BSPP threaded port in pneumatic and fluid-handling systems. It is commonly used in automation, packaging, and material handling equipment to route compressed air or inert gases at a 90-degree angle.
What are the specifications of the LEGRIS 3199 10 13 fitting?
The LEGRIS 3199 10 13 is a push-to-connect x MBSPP elbow fitting. It accepts 10 mm OD tube and has a 1/4 in male BSPP thread. The body is made of nylon and nickel-plated brass, and it is sold in a 10-pack. The color is black.
Where to buy LEGRIS push-fit fittings in worldwide?
3G Electric supplies LEGRIS push-fit fittings worldwide. We interpret your demand, source the correct components, and handle logistics and customs clearance for delivery to your facility. Contact us for pricing and lead time on the LEGRIS 3199 10 13 elbow fitting.
How to install a LEGRIS push-to-connect elbow fitting?
To install a LEGRIS push-to-connect elbow fitting, cut the 10 mm OD tube square and deburr the end. Push the tube fully into the fitting until it stops. For the threaded end, apply PTFE tape to the 1/4 in MBSPP thread and tighten into the port. Ensure no side load on the tube.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









