LEGRIS Manual Two-Way Ball Valve: 1/4 in, Nylon, Straight, Push x MNPT
The LEGRIS Manual Two-Way Ball Valve (MPN 7915 56 11) is a nylon ball valve with a 1/4 in straight configuration and a lever handle. It features a Push x MNPT connection and is rated for a maximum pressure of 145 psi…
SKU 3G-OTH-431844
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Manual Two-Way Ball Valve (MPN 7915 56 11) is a nylon ball valve with a 1/4 in straight configuration and a lever handle. It features a Push x MNPT connection and is rated for a maximum pressure of 145 psi (CWP).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS 7915 56 11 ball valve used for?
The LEGRIS 7915 56 11 is a manual two-way ball valve used to start, stop, or redirect flow in pneumatic or low-pressure fluid systems. Its 1/4 in nylon body and push-to-connect x MNPT ends make it suitable for instrumentation, control panels, and general industrial applications requiring a compact, corrosion-resistant shut-off valve.
What are the specifications of the LEGRIS 7915 56 11 ball valve?
The LEGRIS 7915 56 11 is a 1/4 in straight nylon ball valve with a lever handle. It has a push x MNPT connection and a maximum pressure rating of 145 psi (CWP). The manufacturer part number is 7915 56 11. This valve is designed for manual on/off control in pneumatic and fluid handling systems.
Where to buy the LEGRIS 7915 56 11 ball valve worldwide?
3G Electric supplies the LEGRIS 7915 56 11 ball valve to customers worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this nylon ball valve from LEGRIS.
How to install a LEGRIS push-to-connect ball valve?
To install a LEGRIS push-to-connect ball valve, ensure the tubing is cut square and free of burrs. Push the tube firmly into the push-fit port until it stops. For the MNPT end, apply thread sealant and tighten to the mating port. Always verify the valve is in the closed position before pressurizing the system.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.












