LEGRIS Compression Fitting Adapter: 12 mm OD x 3/8 in Pipe Fitting Size, Compression x MBSPT
The LEGRIS Compression Fitting Adapter (MPN 0105 12 17) is a standard sleeve brass compression fitting, type Compression x MBSPT, supplied in a 10-pack. It connects 12 mm OD tubing to a 3/8 in pipe fitting size. 3G…
SKU 3G-OTH-481952
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Adapter (MPN 0105 12 17) is a standard sleeve brass compression fitting, type Compression x MBSPT, supplied in a 10-pack. It connects 12 mm OD tubing to a 3/8 in pipe fitting size. 3G Electric sources this OEM part across 14 industrial departments, with specialist depth in pneumatics and fluid handling.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS 0105 12 17 compression fitting used for?
The LEGRIS 0105 12 17 is a standard sleeve brass compression fitting adapter used to connect 12 mm OD tubing to a 3/8 in male BSPT pipe thread. It is commonly applied in pneumatic and fluid handling systems where a leak-tight, removable joint is required.
What are the specifications of the LEGRIS 0105 12 17?
The LEGRIS 0105 12 17 is a compression x MBSPT adapter with a 12 mm OD tube size and a 3/8 in pipe fitting size. It is made of brass with a standard sleeve design and is supplied in a 10-pack. The manufacturer part number is 0105 12 17.
Where to buy LEGRIS 0105 12 17 worldwide?
3G Electric supplies the LEGRIS 0105 12 17 compression fitting adapter to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this OEM part.
How to install a LEGRIS compression fitting adapter?
To install the LEGRIS 0105 12 17, slide the nut and sleeve onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand plus 1-1.5 turns with a wrench. Avoid overtightening to prevent sleeve deformation. Always use a thread sealant on the MBSPT end.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
