LEGRIS Push-Fit Tee Fitting: 8 mm OD x 8 mm OD x 3/8 in Pipe Size, Tube x Tube x MBSPT
The LEGRIS Push-Fit Tee Fitting (MPN 3103 08 17) is a nylon and nickel-plated brass tube fitting configured as Tube x Tube x MBSPT, in black, sold in packs of 10. It connects 8 mm OD tubing on two ports and a 3/8 in…
SKU 3G-OTH-492059
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Push-Fit Tee Fitting (MPN 3103 08 17) is a nylon and nickel-plated brass tube fitting configured as Tube x Tube x MBSPT, in black, sold in packs of 10. It connects 8 mm OD tubing on two ports and a 3/8 in pipe size on the third, enabling branch connections in pneumatic or fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS Push-Fit Tee Fitting used for?
A LEGRIS Push-Fit Tee Fitting creates a branch connection in pneumatic or fluid systems. It joins two 8 mm OD tubes and one 3/8 in male BSPT threaded port, enabling reliable air or fluid distribution in industrial automation, packaging, and material handling applications.
What are the specifications of the LEGRIS 3103 08 17 fitting?
The LEGRIS 3103 08 17 is a nylon and nickel-plated brass push-fit tee fitting. It has two ports for 8 mm OD tubing and one port for 3/8 in pipe size (MBSPT). It is black and sold in packs of 10. This fitting is designed for pneumatic and low-pressure fluid systems.
Where to buy LEGRIS push-fit fittings worldwide?
3G Electric supplies LEGRIS push-fit fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver genuine LEGRIS components like the 3103 08 17 tee fitting to your facility, regardless of location.
How to install a LEGRIS push-fit tee fitting?
To install a LEGRIS push-fit tee fitting, cut tubing square and deburr the end. Push the tube fully into the collet until it stops. For the threaded port, apply PTFE tape to the 3/8 in MBSPT thread and tighten by hand plus a quarter turn. Ensure no side load on the fitting.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









