LEGRIS Metal Pipe Straight: Straight, 1/2 in x 1/8 in
The LEGRIS Metal Pipe Straight is a threaded high-pressure pipe fitting with a 1/2 in x 1/8 in configuration, featuring Male BSPT Threaded x Male BSPT Threaded connections (MPN 0121 21 10). It has a maximum operating…
SKU 3G-OTH-477383
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Metal Pipe Straight is a threaded high-pressure pipe fitting with a 1/2 in x 1/8 in configuration, featuring Male BSPT Threaded x Male BSPT Threaded connections (MPN 0121 21 10). It has a maximum operating pressure of 1,000 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS Metal Pipe Straight used for?
The LEGRIS Metal Pipe Straight is a threaded high-pressure pipe fitting used to connect or extend metal piping in industrial fluid systems. It is suitable for applications requiring a 1/2 in x 1/8 in Male BSPT Threaded x Male BSPT Threaded configuration, handling pressures up to 1,000 psi.
What are the specifications of the LEGRIS 0121 21 10 pipe fitting?
The LEGRIS 0121 21 10 is a straight metal pipe fitting with a 1/2 in x 1/8 in size, Male BSPT Threaded x Male BSPT Threaded connections. Its maximum operating pressure is 1,000 psi. This fitting is designed for high-pressure pneumatic or hydraulic systems where a leak-tight taper thread seal is required.
Where to buy LEGRIS pipe fittings in worldwide?
3G Electric supplies LEGRIS pipe fittings like the 0121 21 10 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine parts across 14 departments, including pneumatics, and deliver to any international destination.
How to install a LEGRIS Male BSPT threaded fitting?
To install a LEGRIS Male BSPT threaded fitting, apply a suitable thread sealant (e.g., PTFE tape or pipe dope) to the male threads, then hand-tighten into the female port. Use a wrench for final tightening—avoid over-torquing to prevent cracking. Always verify the system is depressurized before installation.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
