LEGRIS Plug: Cored Plug, C36000 Brass, 8 mm, Metric Threaded, 3,626 psi
The LEGRIS Cored Plug is a threaded extreme-pressure instrumentation pipe fitting made from C36000 brass with metric threading for 8 mm pipe size. It is rated for a maximum operating pressure of 3,626 psi and has a…
SKU 3G-OTH-464104
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Cored Plug is a threaded extreme-pressure instrumentation pipe fitting made from C36000 brass with metric threading for 8 mm pipe size. It is rated for a maximum operating pressure of 3,626 psi and has a length of 7/16 in (MPN 0200 57 00).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS cored plug used for?
A LEGRIS cored plug seals unused ports in extreme-pressure instrumentation systems. It is used in hydraulic and pneumatic circuits where a leak-tight closure is required at pressures up to 3,626 psi. 3G Electric supplies this C36000 brass plug with metric threading for 8 mm pipe size.
What are the specifications of the LEGRIS 0200 57 00 plug?
The LEGRIS 0200 57 00 is a cored plug made from C36000 brass with metric threading for 8 mm pipe size. It has a maximum operating pressure of 3,626 psi and a length of 7/16 in. This threaded extreme-pressure instrumentation fitting is designed for reliable sealing in demanding applications.
Where to buy LEGRIS cored plugs worldwide?
3G Electric supplies LEGRIS cored plugs worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver the LEGRIS 0200 57 00 plug to your facility. Contact us for availability and lead time on this C36000 brass extreme-pressure fitting.
How to install a LEGRIS cored plug?
To install a LEGRIS cored plug, clean the port threads and apply a compatible thread sealant. Hand-tighten the plug into the 8 mm metric threaded port, then use a wrench to achieve the recommended torque without over-tightening. Verify the seal at the system's maximum operating pressure of 3,626 psi.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS threaded extreme-pressure instrumentation pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
