LEGRIS Metal Pipe Wye: Wye, 1/2 in x 1/2 in x 1/2 in, Nickel-Plated Brass, 870 psi
The LEGRIS Metal Pipe Wye is a threaded medium-pressure pipe fitting, type 1/2 in x 1/2 in x 1/2 in, constructed from nickel-plated brass with a maximum operating pressure of 870 psi and a length of 1 17/64 in (MPN…
SKU 3G-OTH-464228
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Metal Pipe Wye is a threaded medium-pressure pipe fitting, type 1/2 in x 1/2 in x 1/2 in, constructed from nickel-plated brass with a maximum operating pressure of 870 psi and a length of 1 17/64 in (MPN 0910 00 21). 3G Electric interprets demand for this fitting across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor for brands including LEGRIS.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS metal pipe wye used for?
A LEGRIS metal pipe wye splits one fluid or air line into two branches in medium-pressure systems. It is commonly used in pneumatic controls, lubrication circuits, and instrumentation lines across industrial departments such as machining, material handling, and combustion.
What are the specifications of the LEGRIS 0910 00 21 pipe wye?
The LEGRIS 0910 00 21 is a 1/2 in x 1/2 in x 1/2 in nickel-plated brass wye with a maximum operating pressure of 870 psi and a length of 1 17/64 in. It is a threaded medium-pressure pipe fitting suitable for pneumatic and hydraulic branch connections.
Where to buy LEGRIS pipe fittings in worldwide?
3G Electric supplies LEGRIS pipe fittings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine LEGRIS components like the 0910 00 21 wye to any location, ensuring compliance with local import requirements.
How to install a LEGRIS brass pipe wye?
Apply thread sealant to male NPT threads and hand-tighten the LEGRIS wye, then use a wrench for an additional 1-2 turns. Avoid over-tightening to prevent cracking the nickel-plated brass. Test the joint at operating pressure up to 870 psi before putting the system into service.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS threaded medium-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
