LEGRIS Compression Fitting Coupling: 3/8 in Pipe x 8 mm OD Fitting Size, BSPP x Compression
The LEGRIS Compression Fitting Coupling (MPN 0101 08 17) is a standard sleeve brass compression fitting with a 3/8 in pipe x 8 mm OD fitting size, Type BSPP x Compression, Brass. This LEGRIS component is a genuine…
SKU 3G-OTH-481944
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Coupling (MPN 0101 08 17) is a standard sleeve brass compression fitting with a 3/8 in pipe x 8 mm OD fitting size, Type BSPP x Compression, Brass. This LEGRIS component is a genuine industrial fitting for pneumatic or fluid-handling connections.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS 0101 08 17 compression fitting used for?
The LEGRIS 0101 08 17 is a standard sleeve brass compression coupling used to connect 3/8 in BSPP threaded pipe to 8 mm OD tubing in pneumatic or fluid-handling systems. It provides a leak-tight seal in industrial air lines, lubrication circuits, and low-pressure fluid transfer applications.
What are the specifications of the LEGRIS 0101 08 17?
The LEGRIS 0101 08 17 is a brass compression fitting coupling with a 3/8 in BSPP thread on one end and an 8 mm OD compression connection on the other. It is a standard sleeve type, rated for pneumatic and fluid service. The manufacturer part number is 0101 08 17.
Where to buy LEGRIS compression fittings worldwide?
3G Electric supplies LEGRIS compression fittings like the 0101 08 17 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this genuine LEGRIS brass coupling for your pneumatic or fluid-handling system.
How to install a LEGRIS brass compression fitting?
To install a LEGRIS brass compression fitting, cut the tubing square, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand plus 1-1.5 turns with a wrench. Avoid overtightening to prevent sleeve damage.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









