LEGRIS Compression Fitting Coupling: 3/8 in Pipe x 10 mm OD Fitting Size, BSPP x Compression
The LEGRIS Compression Fitting Coupling (MPN 0101 10 17) is a standard sleeve brass compression fitting with a 3/8 in pipe x 10 mm OD fitting size, type BSPP x Compression. 3G Electric interprets your demand for this…
SKU 3G-OTH-482117
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Coupling (MPN 0101 10 17) is a standard sleeve brass compression fitting with a 3/8 in pipe x 10 mm OD fitting size, type BSPP x Compression. 3G Electric interprets your demand for this OEM part, sources it across 14 industrial departments, and supports with specialist depth in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS compression fitting coupling used for?
A LEGRIS compression fitting coupling connects tubing to threaded ports in pneumatic, hydraulic, and fluid-handling systems. This brass BSPP x compression coupling (MPN 0101 10 17) provides a leak-resistant seal for 10 mm OD tubing to a 3/8 in BSPP female port.
What are the specifications of the LEGRIS 0101 10 17 compression fitting?
The LEGRIS 0101 10 17 is a standard sleeve brass compression fitting. It has a 3/8 in BSPP male thread x 10 mm OD compression end, type BSPP x Compression. The body material is brass, and it is a coupling-style fitting for joining tube to pipe.
Where to buy LEGRIS compression fittings in worldwide?
3G Electric supplies LEGRIS compression fittings like the 0101 10 17 to customers worldwide. We interpret your demand, source the part across 14 industrial departments, and handle full logistics and customs clearance for delivery to your location.
How to install a LEGRIS brass compression fitting?
To install a LEGRIS brass compression fitting, slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand plus 1-1.5 turns with a wrench. Avoid overtightening to prevent tube deformation. Always use the correct tube size (10 mm OD).
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









