LEGRIS Compression Fitting Coupling: 1/2 in Pipe x 10 mm OD Fitting Size, NPT x Compression
The LEGRIS Compression Fitting Coupling (MPN 0105 10 22) is a standard sleeve brass compression fitting with a 1/2 in NPT x 10 mm OD fitting size. This NPT x Compression, Brass type coupling is designed for…
SKU 3G-OTH-481996
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Coupling (MPN 0105 10 22) is a standard sleeve brass compression fitting with a 1/2 in NPT x 10 mm OD fitting size. This NPT x Compression, Brass type coupling is designed for connecting tubing to threaded pipe ports.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS 0105 10 22 compression fitting used for?
The LEGRIS 0105 10 22 is a standard sleeve brass compression fitting coupling used to connect 10 mm OD tubing to a 1/2 in NPT threaded pipe port. It is commonly applied in pneumatic, hydraulic, and fluid-handling systems where a leak-tight, metal-to-metal seal is required.
What are the specifications of the LEGRIS 0105 10 22?
The LEGRIS 0105 10 22 is a brass compression fitting coupling with a 1/2 in NPT female thread on one end and a 10 mm OD compression connection on the other. It is a standard sleeve type, rated for use with copper or plastic tubing in industrial fluid and air lines.
Where to buy the LEGRIS 0105 10 22 worldwide?
3G Electric supplies the LEGRIS 0105 10 22 compression fitting to customers worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this brass coupling.
How to install a LEGRIS brass compression fitting?
To install the LEGRIS 0105 10 22, slide the compression nut and sleeve onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn. Avoid overtightening to prevent tube deformation. Always use a tube cutter for a square end.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
