LEGRIS Compression Fitting Coupling: 1/4 in Pipe x 8 mm OD Fitting Size, BSPT x Compression
The LEGRIS Compression Fitting Coupling (MPN 0120 08 13) is a standard sleeve brass compression fitting with a 1/4 in pipe x 8 mm OD fitting size, Type BSPT x Compression, Brass. This LEGRIS component is a genuine…
SKU 3G-OTH-482076
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Coupling (MPN 0120 08 13) is a standard sleeve brass compression fitting with a 1/4 in pipe x 8 mm OD fitting size, Type BSPT x Compression, Brass. This LEGRIS component is a genuine industrial fitting for pneumatic or fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS compression fitting coupling used for?
A LEGRIS compression fitting coupling connects 1/4 in BSPT pipe to 8 mm OD tubing in pneumatic or fluid systems. It provides a leak-resistant seal in industrial air lines, lubrication circuits, and instrumentation applications where brass durability and standard sleeve design are required.
What are the specifications of the LEGRIS 0120 08 13 compression fitting?
The LEGRIS 0120 08 13 is a standard sleeve brass compression fitting with a 1/4 in pipe x 8 mm OD fitting size, BSPT x Compression connection type. It is made of brass and is a genuine LEGRIS component for pneumatic or fluid systems.
Where to buy LEGRIS compression fittings in worldwide?
3G Electric supplies LEGRIS compression fittings like the 0120 08 13 to worldwide customers. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this genuine LEGRIS component for your pneumatic or fluid system.
How to install a LEGRIS brass compression fitting?
To install a LEGRIS brass compression fitting, cut tubing squarely, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Avoid overtightening to prevent sleeve damage.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









