LEGRIS Compression Fitting Coupling: 3/8 in Pipe x 14 mm OD Fitting Size, BSPP x Compression
The LEGRIS Compression Fitting Coupling (MPN 0101 14 17) is a standard sleeve brass compression fitting with a 3/8 in pipe x 14 mm OD fitting size, type BSPP x Compression, Brass. 3G Electric sources this genuine…
SKU 3G-OTH-482017
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Coupling (MPN 0101 14 17) is a standard sleeve brass compression fitting with a 3/8 in pipe x 14 mm OD fitting size, type BSPP x Compression, Brass. 3G Electric sources this genuine LEGRIS component across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS compression fitting coupling used for?
A LEGRIS compression fitting coupling connects tubing to threaded ports in pneumatic, hydraulic, and fluid-handling systems. It provides a leak-tight seal without soldering, ideal for instrumentation, lubrication lines, and control panels across industrial departments.
What are the specifications of the LEGRIS 0101 14 17 compression fitting?
The LEGRIS 0101 14 17 is a standard sleeve brass compression fitting with a 3/8 in BSPP thread x 14 mm OD tube size. It is made of brass and designed for BSPP x Compression connections. 3G Electric supplies this genuine LEGRIS component globally.
Where to buy LEGRIS compression fittings in worldwide?
3G Electric supplies genuine LEGRIS compression fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to source the LEGRIS 0101 14 17 or any other industrial component across 14 departments.
How to install a LEGRIS brass compression fitting?
Cut tubing square, deburr, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand plus 1-1.25 turns with a wrench. Avoid overtightening to prevent sleeve deformation. Always follow LEGRIS guidelines.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









