LEGRIS Compression Fitting Adapter: 18 mm OD x 18 mm OD Fitting Size
The LEGRIS Compression Fitting Adapter (MPN 0116 18 00) is a standard sleeve brass compression fitting with a Compression x Compression configuration, sized for 18 mm OD x 18 mm OD tubing. This adapter is a genuine…
SKU 3G-OTH-482088
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Adapter (MPN 0116 18 00) is a standard sleeve brass compression fitting with a Compression x Compression configuration, sized for 18 mm OD x 18 mm OD tubing. This adapter is a genuine LEGRIS component, suitable for industrial applications requiring a direct compression-to-compression connection.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS compression fitting adapter used for?
A LEGRIS compression fitting adapter connects two 18 mm OD tubes directly in a compression-to-compression configuration. It is used in pneumatic, hydraulic, and fluid-handling systems across industrial departments such as machining, instrumentation, and power transmission, where a leak-free, secure joint is required.
What are the specifications of the LEGRIS 0116 18 00?
The LEGRIS 0116 18 00 is a standard sleeve brass compression fitting adapter with a Compression x Compression type. It fits 18 mm OD x 18 mm OD tubing. This genuine LEGRIS component is designed for industrial applications needing a direct compression connection without additional adapters.
Where to buy LEGRIS compression fittings in worldwide?
3G Electric supplies LEGRIS compression fittings like the 0116 18 00 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine components across 14 departments, including pneumatics and instrumentation, ensuring you get the right part.
How to install a LEGRIS compression fitting adapter?
To install a LEGRIS compression fitting adapter, ensure tubing ends are clean and cut square. Slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand until snug. Use a wrench for final tightening—typically 1/4 to 1/2 turn past hand-tight—to create a leak-proof seal.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
