LEGRIS Compression Fitting Coupling: 1/8 in Pipe x 4 mm OD Fitting Size, BSPT x Compression
The LEGRIS Compression Fitting Coupling (MPN 0120 04 10) is a standard sleeve brass compression fitting with a 1/8 in pipe x 4 mm OD fitting size, featuring a BSPT x Compression, Brass type. This coupling is designed…
SKU 3G-OTH-482078
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Compression Fitting Coupling (MPN 0120 04 10) is a standard sleeve brass compression fitting with a 1/8 in pipe x 4 mm OD fitting size, featuring a BSPT x Compression, Brass type. This coupling is designed for connecting tubing to threaded ports in industrial pneumatic and fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS compression fitting coupling used for?
A LEGRIS compression fitting coupling connects tubing to threaded ports in industrial pneumatic and fluid systems. The 0120 04 10 model joins 1/8 in BSPT pipe to 4 mm OD tubing, providing a leak-resistant seal in compressed air, lubrication, and instrumentation lines.
What are the specifications of the LEGRIS 0120 04 10 compression fitting?
The LEGRIS 0120 04 10 is a standard sleeve brass compression fitting with a 1/8 in pipe x 4 mm OD fitting size. It uses a BSPT male thread on the pipe side and a compression connection for tubing. The body is brass, suitable for pneumatic and fluid applications.
Where to buy LEGRIS compression fittings in worldwide?
3G Electric supplies LEGRIS compression fittings like the 0120 04 10 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this BSPT x Compression brass coupling for your pneumatic system.
How to install a LEGRIS compression fitting coupling?
To install a LEGRIS compression fitting, slide the nut and sleeve onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench. Avoid overtightening to prevent tube deformation. Use thread sealant on the BSPT male end for a leak-free seal.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS standard sleeve brass compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









