LEGRIS Push-Fit Adapter Fitting: 1/4 in Pipe x 6 mm OD Size, BSPP x Push-to-Connect
The LEGRIS Push-Fit Adapter Fitting (MPN 3118 06 13) is a BSPP x Push-to-Connect, Black nylon and nickel-plated brass tube fitting, connecting 1/4 in pipe to 6 mm OD tubing. 3G Electric interprets this demand and…
SKU 3G-OTH-492500
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Push-Fit Adapter Fitting (MPN 3118 06 13) is a BSPP x Push-to-Connect, Black nylon and nickel-plated brass tube fitting, connecting 1/4 in pipe to 6 mm OD tubing. 3G Electric interprets this demand and sources it across 14 industrial departments, with specialist depth in pneumatics and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS 3118 06 13 push-fit adapter fitting used for?
The LEGRIS 3118 06 13 is a BSPP x push-to-connect adapter fitting used in pneumatic systems to connect 1/4 in BSPP threaded ports to 6 mm OD nylon or polyurethane tubing. It is common in industrial automation, packaging, and material handling applications where reliable, leak-free connections are required.
What are the specifications of the LEGRIS 3118 06 13 fitting?
The LEGRIS 3118 06 13 is a black nylon and nickel-plated brass push-fit adapter fitting. It connects 1/4 in BSPP male thread to 6 mm OD tubing. The operating pressure range is typically 0 to 20 bar, and temperature range is -20 °C to +80 °C, depending on tubing compatibility.
Where to buy LEGRIS 3118 06 13 fittings worldwide?
3G Electric supplies the LEGRIS 3118 06 13 push-fit adapter fitting worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this pneumatic fitting.
How to install a LEGRIS push-to-connect fitting?
To install the LEGRIS 3118 06 13, cut the 6 mm tubing square, push it fully into the fitting until it stops, then pull back slightly to lock. For the threaded end, apply PTFE tape to the 1/4 in BSPP thread and tighten to 15–20 N·m. Ensure no debris enters the system before pressurising.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









