LEGRIS Push-Fit Elbow Fitting: 1/8 mm Pipe x 5/32 in OD Size, BSPP x Push-to-Connect
The LEGRIS Push-Fit Elbow Fitting (MPN 3169 04 10) is a nylon and nickel-plated brass tube fitting in a BSPP x Push-to-Connect, Black configuration, designed for 1/8 mm pipe x 5/32 in OD size. As a BSPP threaded…
SKU 3G-OTH-492652
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Push-Fit Elbow Fitting (MPN 3169 04 10) is a nylon and nickel-plated brass tube fitting in a BSPP x Push-to-Connect, Black configuration, designed for 1/8 mm pipe x 5/32 in OD size. As a BSPP threaded elbow, it enables secure push-to-connect assembly in pneumatic or fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a LEGRIS Push-Fit Elbow Fitting used for?
The LEGRIS Push-Fit Elbow Fitting (MPN 3169 04 10) is used in pneumatic and fluid systems to connect tubing at a 90° angle. Its BSPP thread and push-to-connect design enable secure, leak-free assembly in industrial automation, packaging, and material handling applications.
What are the specifications of the LEGRIS 3169 04 10 fitting?
This LEGRIS fitting is a nylon and nickel-plated brass elbow with a BSPP x Push-to-Connect, Black configuration. It fits 1/8 mm pipe x 5/32 in OD tubing. The push-to-connect mechanism allows tool-free installation, making it suitable for compressed air and low-pressure fluid circuits.
Where to buy LEGRIS push-fit fittings worldwide?
3G Electric supplies LEGRIS push-fit fittings like the 3169 04 10 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this BSPP elbow fitting for pneumatic systems.
How to install a LEGRIS push-to-connect elbow fitting?
To install the LEGRIS push-fit elbow, cut tubing square, push it fully into the fitting until it stops, then pull gently to confirm lock. For removal, press the collet evenly and pull the tube out. Ensure the BSPP thread is sealed with PTFE tape or sealant before tightening.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









