LEGRIS Push-Fit Adapter Fitting: 12 mm OD x 1/4 in Pipe Size, Push-to-Connect x MNPT
The LEGRIS Push-Fit Adapter Fitting (MPN 3175 12 14) is a nylon and nickel-plated brass tube fitting with a Push-to-Connect x MNPT connection, in a silver finish, designed for 12 mm OD tube to 1/4 in pipe size. 3G…
SKU 3G-OTH-491943
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LEGRIS Push-Fit Adapter Fitting (MPN 3175 12 14) is a nylon and nickel-plated brass tube fitting with a Push-to-Connect x MNPT connection, in a silver finish, designed for 12 mm OD tube to 1/4 in pipe size. 3G Electric interprets this demand and sources it across 14 industrial departments, with specialist depth in pneumatics and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LEGRIS 3175 12 14 push-fit adapter used for?
The LEGRIS 3175 12 14 is a push-fit adapter fitting used to connect 12 mm OD nylon or polyurethane tubing to a 1/4 in male NPT threaded port. It is common in pneumatic systems, air lines, and fluid control applications across industrial automation and manufacturing.
What are the specifications of the LEGRIS 3175 12 14?
The LEGRIS 3175 12 14 is a push-to-connect x MNPT adapter fitting made of nickel-plated brass with a silver finish. It connects 12 mm OD tubing to 1/4 in pipe size. The manufacturer part number is 3175 12 14. It is designed for pneumatic and fluid handling systems.
Where to buy the LEGRIS 3175 12 14 worldwide?
3G Electric supplies the LEGRIS 3175 12 14 push-fit adapter fitting to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us to order this genuine LEGRIS part for your pneumatic or fluid control application.
How to install a LEGRIS push-fit adapter fitting?
To install the LEGRIS 3175 12 14, cut the tube square, push it fully into the fitting until it stops, then pull back slightly to lock. For the threaded end, apply PTFE tape to the male NPT threads and tighten into the port. Ensure the system is depressurized before installation.
Digunakan dalam
Aplikasi umum untuk LEGRISLEGRIS Produk
3G Electric memasok LEGRIS nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.








