LINCOLN ELECTRIC Light Duty Gas Diffuser: Magnum Pro (MPN KP3141-1)
The LINCOLN ELECTRIC Light Duty Gas Diffuser, model KP3141-1, is a threaded gas diffuser designed for use with Magnum Pro 350A contact tip series MIG guns. This component is a genuine LINCOLN ELECTRIC replacement…
SKU 3G-OTH-355808
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The LINCOLN ELECTRIC Light Duty Gas Diffuser, model KP3141-1, is a threaded gas diffuser designed for use with Magnum Pro 350A contact tip series MIG guns. This component is a genuine LINCOLN ELECTRIC replacement part, ensuring proper gas flow for welding applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the LINCOLN ELECTRIC KP3141-1 gas diffuser used for?
The LINCOLN ELECTRIC KP3141-1 is a threaded gas diffuser for Magnum Pro 350A MIG guns. It directs shielding gas evenly around the weld arc, preventing porosity and ensuring clean welds in industrial fabrication, automotive repair, and heavy equipment manufacturing.
What are the specifications of the LINCOLN ELECTRIC KP3141-1 gas diffuser?
The KP3141-1 is a genuine LINCOLN ELECTRIC light duty gas diffuser with a threaded connection type. It is designed for the Magnum Pro 350A contact tip series. The manufacturer part number is KP3141-1, and it is a direct replacement for compatible MIG gun assemblies.
Where to buy the LINCOLN ELECTRIC KP3141-1 gas diffuser worldwide?
3G Electric supplies the LINCOLN ELECTRIC KP3141-1 gas diffuser to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this genuine replacement part.
How to install the LINCOLN ELECTRIC KP3141-1 gas diffuser?
To install the KP3141-1, first disconnect the MIG gun from the welder. Remove the old diffuser by unscrewing it from the gun neck. Thread the new LINCOLN ELECTRIC diffuser on by hand until snug, then tighten with a wrench. Reconnect the gun and check gas flow before welding.
Digunakan dalam
Aplikasi umum untuk LINCOLN ELECTRICLINCOLN ELECTRIC Produk
3G Electric memasok LINCOLN ELECTRIC gas diffusers for lincoln mig guns. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
