MACURCO Fixed Gas Detector: Macurco Control Panel, Carbon Monoxide/Nitrogen Dioxide
The MACURCO CX-12 is a stand-alone detector and controller for nitrogen dioxide, with a measurement range of 0 to 20 ppm. It operates on line voltage (100 to 240V AC), features a digital display, and is designed for…
SKU 3G-OTH-552528
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MACURCO CX-12 is a stand-alone detector and controller for nitrogen dioxide, with a measurement range of 0 to 20 ppm. It operates on line voltage (100 to 240V AC), features a digital display, and is designed for wall mounting with a Macurco control panel.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MACURCO CX-12 fixed gas detector used for?
The MACURCO CX-12 is a stand-alone detector and controller that monitors nitrogen dioxide levels from 0 to 20 ppm. It is typically installed in parking garages, loading docks, or industrial facilities where diesel exhaust poses a health risk, and it interfaces with a Macurco control panel for alarm and ventilation control.
What are the specifications of the MACURCO CX-12?
The MACURCO CX-12 operates on line voltage (100 to 240V AC), has a digital display, and detects nitrogen dioxide over a 0 to 20 ppm range. It is a wall-mounted, stand-alone detector and controller designed for use with a Macurco control panel. The unit is part of MACURCO's Commercial Series.
Where to buy the MACURCO CX-12 worldwide?
3G Electric supplies the MACURCO CX-12 to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this nitrogen dioxide detector and controller.
How to install the MACURCO CX-12 gas detector?
Mount the MACURCO CX-12 on a wall at the height recommended for nitrogen dioxide detection, typically 4 to 6 feet above the floor. Connect line voltage (100 to 240V AC) per local codes and wire the relay outputs to the Macurco control panel. Always follow the manufacturer's installation manual and consult a qualified electrician.
Digunakan dalam
Aplikasi umum untuk MACURCOMACURCO Produk
3G Electric memasok MACURCO fixed gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
