MASTER APPLIANCE Soldering Tip: UT-50 Series, Conical
The MASTER APPLIANCE Soldering Tip is a UT-50 Series conical tip with a 1 mm width, designed for use with the Ultratorch UT-50 handpiece. This replacement tip carries manufacturer part number 71-01-01 and is…
SKU 3G-OTH-359578
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MASTER APPLIANCE Soldering Tip is a UT-50 Series conical tip with a 1 mm width, designed for use with the Ultratorch UT-50 handpiece. This replacement tip carries manufacturer part number 71-01-01 and is compatible with handpiece model UT-50.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MASTER APPLIANCE UT-50 Series soldering tip used for?
The MASTER APPLIANCE UT-50 Series conical tip (MPN 71-01-01) is a replacement tip for the Ultratorch UT-50 handpiece. It is used for precision soldering in electronics repair, HVAC control board work, and general industrial assembly where a 1 mm wide conical point is required.
What are the specifications of the MASTER APPLIANCE 71-01-01 soldering tip?
The MASTER APPLIANCE 71-01-01 is a conical soldering tip with a 1 mm width, part of the UT-50 Series. It is designed exclusively for the Ultratorch UT-50 handpiece. The tip is manufactured by MASTER APPLIANCE and carries the manufacturer part number 71-01-01.
Where to buy MASTER APPLIANCE UT-50 tips worldwide?
3G Electric supplies the MASTER APPLIANCE UT-50 Series conical tip (71-01-01) worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact 3G Electric to source this replacement tip for your Ultratorch UT-50 handpiece.
How to install the MASTER APPLIANCE UT-50 soldering tip?
To install the MASTER APPLIANCE UT-50 tip, ensure the Ultratorch UT-50 handpiece is cool and disconnected from power. Gently insert the conical tip into the heating element and tighten the retaining nut by hand. Avoid overtightening. Always follow the handpiece manufacturer's instructions for safe replacement.
Digunakan dalam
Aplikasi umum untuk MASTER APPLIANCEMASTER APPLIANCE Produk
3G Electric memasok MASTER APPLIANCE ultratorch ut-50 tips. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
