MEGGER Earth Ground Resistance Tester: 0.01 ohm to 20,000 ohm, CAT IV, IP30, Digital
The MEGGER Earth Ground Resistance Tester Kit (MPN DET4TC2 + Clamps (MCC + MVC)) is a digital earth ground resistance tester with a measurement range of 0.01 ohm to 20,000 ohm. It features an IP30 rating, a test…
SKU 3G-OTH-169353
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEGGER Earth Ground Resistance Tester Kit (MPN DET4TC2 + Clamps (MCC + MVC)) is a digital earth ground resistance tester with a measurement range of 0.01 ohm to 20,000 ohm. It features an IP30 rating, a test voltage of 3 V, and selectable test currents of 4.5 mA, 0.45 mA, or 0.045 mA. This CAT IV-rated kit includes the DET4TC2 tester and MCC and MVC clamps.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEGGER Earth Ground Resistance Tester used for?
The MEGGER DET4TC2 kit measures earth ground resistance from 0.01 ohm to 20,000 ohm, ensuring safe grounding in industrial power systems, substations, and telecom sites. It is CAT IV rated for high-energy environments and includes MCC and MVC clamps for clamp-on testing without disconnecting ground rods.
What are the specifications of the MEGGER DET4TC2 earth ground tester?
The MEGGER DET4TC2 has a measurement range of 0.01 ohm to 20,000 ohm, IP30 rating, test voltage of 3 V, and selectable test currents of 4.5 mA, 0.45 mA, or 0.045 mA. It is a CAT IV digital tester with no output, supplied as a kit with MCC and MVC clamps.
Where to buy the MEGGER earth ground resistance tester worldwide?
3G Electric supplies the MEGGER DET4TC2 earth ground resistance tester kit worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine MEGGER test equipment and support procurement across 14 industrial departments.
How to select the right test current for the MEGGER DET4TC2?
Select the test current based on ground rod resistance and noise levels. Use 4.5 mA for low-resistance grounds under 10 ohm, 0.45 mA for medium ranges, and 0.045 mA for high-resistance or noisy environments. The MEGGER DET4TC2 allows manual selection to match site conditions and ensure accurate readings.
Digunakan dalam
Aplikasi umum untuk MEGGERMEGGER Produk
3G Electric memasok MEGGER earth ground resistance tester kits. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
